|Re: 2400 takeapart advice/experience [message #276968 is a reply to message #276941]
||Wed, 31 December 2014 12:55
Registered: December 2014
Re point 6|
Ok, this is the reset switch and I found out where it gets connected to on
the logic board.
> 6) One cable was found detached but I believe I know where it goes, it's
> the single cable coming from part 9222-2990 (structure assembly - see
> Apple's service source exploded view), oddly I do not know what it does
> because the cable attaches to the MLB but I don't know what purpose it
> serves since the cable leads to a small component on the said part but the
> part is simply screwed on to the assembly. Does anyone know what it does? I
> believe it attaches to J1 on the MLB
You received this message because you are a member of the PowerBooks list, a group for those using pre-G3 PowerBooks.
The list FAQ is at http://lowendmac.com/lists/powerbooks.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to firstname.lastname@example.org
To leave this group, send email to email@example.com
For more options, visit this group at http://groups.google.com/group/powerbooks
You received this message because you are subscribed to the Google Groups "PowerBooks" group.
To unsubscribe from this group and stop receiving emails from it, send an email to firstname.lastname@example.org.
For more options, visit https://groups.google.com/d/optout.