Megalextoria
Retro computing and gaming, sci-fi books, tv and movies and other geeky stuff.

Home » Digital Archaeology » Computer Arcana » Apple » Apple II » Now able to print via the GS to modern laser printer.
Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend 
Switch to threaded view of this topic Create a new topic Submit Reply
Now able to print via the GS to modern laser printer. [message #416723] Mon, 19 September 2022 01:11 Go to next message
Anonymous
Karma:
Originally posted by: Leon

Xerox B210 B&W laser printer works right out of the box with Tree Hugger. Printed from AWGS just text with one line tabbed to see if it handled basic page margins. The other image is from MiniPaint the samples image. Current connection is Ethernet to airport express. It did not work with address: port just with address. I will try to print via WiFI but my Mac is in another room and setup has to be USB to enable WI-FI.

The sample images I hint at were posted on Slack the Appleiigs thread.

Thank you to Hugh Hood for checking out the PCL and PS version to see if this would even work.

Not sure about the PCL but the PS certainly does.

Leon
Re: Now able to print via the GS to modern laser printer. [message #416727 is a reply to message #416723] Tue, 20 September 2022 01:38 Go to previous message
Hugh Hood is currently offline  Hugh Hood
Messages: 678
Registered: November 2012
Karma: 0
Senior Member
Leon,

Thanks for your report on the Xerox B210 laser printer working with the
IIGS, the Tree Hugger TCP/IP port driver and the Direct Connect
PostScript Printer Driver.

As you've shown, the DCPPD works with the PostScript Level 3 built into
that printer. Since that printer also has PCL 5/6, you can use the
Harmonie PCL printer driver with it should you want to try it out as well.

Of course, the Harmonie PCL driver will be much slower and probably not
provide the resolution that the PostScript driver does, but there may be
some features in it that the PostScript driver does not offer.

I see that Xerox has now introduced the Model B230 to replace the Model
B210. The B230 should work at least as well as the B210 does since it
includes both PCL 5/6 and PostScript Level 3. At a cost of $170, it
would seem to be a very good value.

BTW -- I never would have attempted the DCPPD without Ewen Wannop's
wonderful tools - ChewBagger and BrkDown. So, I share your thanks with him.




Hugh Hood


On 9/19/2022 12:11 AM, Leon wrote:
> Xerox B210 B&W laser printer works right out of the box with Tree
> Hugger. Printed from AWGS just text with one line tabbed to see if
> it handled basic page margins. The other image is from MiniPaint the
> samples image. Current connection is Ethernet to airport express.
> It did not work with address: port just with address. I will try to
> print via WiFI but my Mac is in another room and setup has to be USB
> to enable WI-FI.
>
> The sample images I hint at were posted on Slack the Appleiigs
> thread.
>
> Thank you to Hugh Hood for checking out the PCL and PS version to see
> if this would even work.
>
> Not sure about the PCL but the PS certainly does.
>
> Leon
  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: SNAP error 440 Posting not allowed
Next Topic: Kansasfest 2023 - not happening?
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Fri Mar 29 07:41:06 EDT 2024

Total time taken to generate the page: 0.08559 seconds