c128d floppy seek [message #411960] |
Sat, 23 October 2021 00:56 |
|
Originally posted by: nospam.Daniel.Path
Hello All.
when i boot up my c128 in 128 mode the floppy seeks and tries to boot, but it
fails (because the drive is empty) and the flash starts to blink and do not
stop blinking. is it the normal behaviour? i think the blink should stop.
anyways the drive seems to work fine.
thanks,
--
Daniel
.... 6:48pm up 15 days, 5:24:29, load: 69 processes, 276 threads.
|
|
|
Re: c128d floppy seek [message #411963 is a reply to message #411960] |
Sat, 23 October 2021 17:33 |
Andreas Kohlbach
Messages: 1456 Registered: December 2011
Karma: 0
|
Senior Member |
|
|
On Sat, 23 Oct 2021 16:56:40 +1200, Daniel Path wrote:
>
> when i boot up my c128 in 128 mode the floppy seeks and tries to boot, but it
> fails (because the drive is empty) and the flash starts to blink and do not
> stop blinking. is it the normal behaviour? i think the blink should stop.
> anyways the drive seems to work fine.
That is normal. At least for a 1541 (hooked up to a C64). Suppose it's
the same for a C128.
--
Andreas
|
|
|
c128d floppy seek [message #411970 is a reply to message #411963] |
Sat, 23 October 2021 19:06 |
|
Originally posted by: nospam.Daniel.Path
Hello Andreas.
23 Oct 21 17:33, you wrote to me:
AK> On Sat, 23 Oct 2021 16:56:40 +1200, Daniel Path wrote:
>>
>> when i boot up my c128 in 128 mode the floppy seeks and tries to
>> boot, but it fails (because the drive is empty) and the flash starts
>> to blink and do not stop blinking. is it the normal behaviour? i
>> think the blink should stop. anyways the drive seems to work fine.
AK> That is normal. At least for a 1541 (hooked up to a C64). Suppose it's
AK> the same for a C128.
but the c64 do not want to boot from the disk :)
--
Daniel
.... 12:58am up 15 days, 23:34:53, load: 69 processes, 276 threads.
|
|
|
Re: c128d floppy seek [message #411971 is a reply to message #411960] |
Sun, 24 October 2021 06:05 |
Robert Roland
Messages: 85 Registered: July 2012
Karma: 0
|
Member |
|
|
On Sat, 23 Oct 2021 16:56:40 +1200,
nospam.Daniel.Path@f52.n371.z2.fidonet.org (Daniel Path) wrote:
> i think the blink should stop
I just tried it in the Vice emulator. There, the blinking does stop.
The drive status reads the startup message, not just "OK". That might
suggest that the C128 resets the drive after the unsuccessful boot
attempt.
Could it be that the reset line in your IEC cable is broken? Does the
drive restart when you boot into C64 mode?
--
RoRo
|
|
|
c128d floppy seek [message #412004 is a reply to message #411971] |
Tue, 26 October 2021 07:05 |
|
Originally posted by: nospam.Daniel.Path
Hello Robert.
24 Oct 21 12:05, you wrote to me:
RR> On Sat, 23 Oct 2021 16:56:40 +1200,
RR> nospam.Daniel.Path@f52.n371.z2.fidonet.org (Daniel Path) wrote:
>> i think the blink should stop
RR> I just tried it in the Vice emulator. There, the blinking does stop.
RR> The drive status reads the startup message, not just "OK". That might
RR> suggest that the C128 resets the drive after the unsuccessful boot
RR> attempt.
RR> Could it be that the reset line in your IEC cable is broken?
hmm i did not opened it yet
RR> Does the
RR> drive restart when you boot into C64 mode?
nope, not with go64.
but if i hold the commodore key while booting up, then everything seems to be
normal, no blinking
Daniel
.... 1:04am up 18 days, 11:40:22, load: 69 processes, 276 threads.
|
|
|
Re: c128d floppy seek [message #412015 is a reply to message #412004] |
Wed, 27 October 2021 11:41 |
Robert Roland
Messages: 85 Registered: July 2012
Karma: 0
|
Member |
|
|
On Tue, 26 Oct 2021 23:05:50 +1200,
nospam.Daniel.Path@f52.n371.z2.fidonet.org (Daniel Path) wrote:
> but if i hold the commodore key while booting up, then everything seems to be
> normal, no blinking
During this, the drive light should come on for a second or so, and
the spindle motor should spin for a couple of seconds.
If it does not, it could indicate that your IEC cable is bad. Do you
have another one to test?
--
RoRo
|
|
|