Megalextoria
Retro computing and gaming, sci-fi books, tv and movies and other geeky stuff.

Home » Archive » net.micro » UNIX* for CompuPro 68K machine
Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend 
Switch to threaded view of this topic Create a new topic Submit Reply
- UNIX* for CompuPro 68K machine [message #115116] Wed, 18 September 2013 16:43 Go to next message
brat is currently offline  brat
Messages: 3
Registered: May 2013
Karma: 0
Junior Member
Message-ID: <170@gitpyr.UUCP>
Date: Sun, 24-Feb-85 22:38:44 EST
Article-I.D.: gitpyr.170
Posted: Sun Feb 24 22:38:44 1985
Date-Received: Wed, 27-Feb-85 07:46:33 EST
Distribution: net
Organization: Georgia Institute of Technology, Atlanta, GA
Lines: 10
Xref: watmath net.wanted:5878 net.micro:9499

I posted this request several months ago, and got nothing but replies
asking me to let them know if I found anything, so someone out there
must be interested.

I'm looking for a UNIX* system to run on a (Godbout) CompuPro 68000 (with
an S-100 Bus) for a friend.  I don't think it has to be ad hoc.. He's
probably willing to pay for it.  If anyone has any pointers, I'd
appreciate them.  Thanks.

				Steven
- Re: UNIX* for CompuPro 68K machine [message #116920 is a reply to message #115116] Mon, 23 September 2013 14:29 Go to previous messageGo to next message
Samuel is currently offline  Samuel
Messages: 40
Registered: May 2013
Karma: 0
Member
Message-ID: <8693@brl-tgr.ARPA>
Date: Tue, 26-Feb-85 22:47:58 EST
Article-I.D.: brl-tgr.8693
Posted: Tue Feb 26 22:47:58 1985
Date-Received: Sun, 3-Mar-85 02:46:34 EST
Sender: news@brl-tgr.ARPA
Lines: 18

Here is the contact I have for this Unix.  I'm waiting for it to 
materialize myself:

		Com Cen Technology Limited
		United Kingdom (0792) 796000
		Gary Stone.

The Canadian source is:

		Dynacomp
		Vancouver, Canada
		Doug Stead, (604) 872-7737

I called Dynacomp a couple of months ago, and the price then was $1500.
I personally don't know anyone who has this yet.

					-- sam hahn
-------
- Re: UNIX* for CompuPro 68K machine [message #116976 is a reply to message #115116] Mon, 23 September 2013 14:33 Go to previous messageGo to next message
mts is currently offline  mts
Messages: 13
Registered: May 2013
Karma: 0
Junior Member
Message-ID: <383@utai.UUCP>
Date: Thu, 7-Mar-85 11:38:43 EST
Article-I.D.: utai.383
Posted: Thu Mar  7 11:38:43 1985
Date-Received: Thu, 7-Mar-85 12:23:31 EST
References: <8693@brl-tgr.ARPA>
Reply-To: mts@utai.UUCP (Martin Stanley)
Distribution: net
Organization: CSRI, University of Toronto
Lines: 32
Summary: have been running it for a few months


I have been running Unix System V for a few months now on the 68K
CompuPro. The system is very good and quite reliable. If you want
more info send me a note.


 Martin Stanley
 Department of Computer Science
 University of Toronto
 Toronto, ON
 M5S 1A4

 USENET:	{cornell,decvax,ihnp4,linus,utzoo,uw-beaver}!utcsri!utai!mts
 CSNET:		mts@toronto
 ARPANET:	mts.toronto@csnet-relay

 Please use one of the above three addresses, not necessarily the address
 in the mail header.
-- 

 Martin Stanley
 Department of Computer Science
 University of Toronto
 Toronto, ON
 M5S 1A4

 USENET:	{cornell,decvax,ihnp4,linus,utzoo,uw-beaver}!utcsri!utai!mts
 CSNET:		mts@toronto
 ARPANET:	mts.toronto@csnet-relay

 Please use one of the above three addresses, not necessarily the address
 in the mail header.
- Re: UNIX* for CompuPro 68K machine [message #117018 is a reply to message #115116] Mon, 23 September 2013 14:34 Go to previous message
drf is currently offline  drf
Messages: 2
Registered: September 2013
Karma: 0
Junior Member
Message-ID: <132@ncvet.UUCP>
Date: Mon, 18-Feb-85 02:00:31 EST
Article-I.D.: ncvet.132
Posted: Mon Feb 18 02:00:31 1985
Date-Received: Sun, 10-Mar-85 08:13:53 EST
Reply-To: drf@ncvet.UUCP (Dwight R. Frye)
Organization: N.C. State University Vet School, Raleigh
Lines: 17

I have been running the Unix System V port from DynaComp
for about 2 weeks now. It has proven to be very reliable
for a newly released system. Anyone interested in it can
contact Doug Stead at DynaComp.

In case someone missed the previous article ...

                DynaComp Computer Systems Ltd.
                Suite 100
                210 West Broadway
                Vancouver, British Columbia  V5Y 3W2
                (604) 872-7737

More information about this system can also be found in
upcoming editions of the CPRO Users Group newsletter.
  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Voltage protection for micros
Next Topic: Wanted: Info on Interfacing FPP's to M68k's
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Mon Jun 30 08:39:47 EDT 2025

Total time taken to generate the page: 13.29814 seconds