» Digital Archaeology
» Computer Arcana
» PowerPC Macs
» Re: Cursor and PRAM Issues
|Re: Cursor and PRAM Issues [message #339929]
||Tue, 21 March 2017 13:04
Registered: August 2012
On Mar 21, 2017, at 11:49 AM, Sky King <firstname.lastname@example.org> wrote:|
> What's going on here????
1) Maybe dead PRAM battery?
2) Booting into Open Firmware and reseting the NVRAM might help:
Hold Cmd-Opt-O-F at boot. At the command prompt, type the commands (each followed by a <Return>:
the responses to these commands should be “ok” and then an reboot automatically.
3) I think that sometimes cursor artifacts are related to video card issues, so you might try reseating the video card in its slot and reseating the cables.
You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to email@example.com
For more options, visit this group at http://groups.google.com/group/g3-5-list
You received this message because you are subscribed to the Google Groups "G-Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email to firstname.lastname@example.org.
For more options, visit https://groups.google.com/d/optout.
Current Time: Mon Oct 22 08:00:00 EDT 2018
Total time taken to generate the page: 0.01575 seconds