Atari STF/STE IDE interface sells ;-) few pieces still available. [message #317370] |
Wed, 04 May 2016 04:10 |
|
Originally posted by: Bertrand C
Hi everybody.
I just finished a few IDE interfaces based on Ppera conception/design.
STF and STE versions.
STF version needs a few soldring skills, because you'll have to solder a DIL64 socket above the processor.
STE version is solder free.
I sell these interfaces 30 EURO each (including interface, cable and floppy disk with free driver versions)
For the shipping cost (with tracking) : 2,50 EURO to France. 5.50 EURO to Europe, 7 EURO worldwide.
10 pièces of each cartegory are still remaining at this time.
contact me at atari.ide@gmail.com for any questions or pictures.
Thank you ;-)
|
|
|
Re: Atari STF/STE IDE interface sells ;-) few pieces still available. [message #317376 is a reply to message #317370] |
Wed, 04 May 2016 04:55 |
Guillaume Tello
Messages: 60 Registered: October 2012
Karma: 0
|
Member |
|
|
Le 04/05/2016 à 10:10, Bertrand C a écrit :
> Hi everybody.
> I just finished a few IDE interfaces based on Ppera conception/design.
> STF and STE versions.
>
> STF version needs a few soldring skills, because you'll have to solder a DIL64 socket above the processor.
>
> STE version is solder free.
>
> I sell these interfaces 30 EURO each (including interface, cable and floppy disk with free driver versions)
> For the shipping cost (with tracking) : 2,50 EURO to France. 5.50 EURO to Europe, 7 EURO worldwide.
>
> 10 pièces of each cartegory are still remaining at this time.
>
> contact me at atari.ide@gmail.com for any questions or pictures.
>
> Thank you ;-)
>
Hello,
what can be connected to the DIE interface? Both HD and CD ROMs ?
Guillaume.
|
|
|
Re: Atari STF/STE IDE interface sells ;-) few pieces still available. [message #317665 is a reply to message #317370] |
Sun, 08 May 2016 05:15 |
|
Originally posted by: Bertrand C
Le mercredi 4 mai 2016 10:10:27 UTC+2, Bertrand C a écrit :
> Hi everybody.
> I just finished a few IDE interfaces based on Ppera conception/design.
> STF and STE versions.
>
> STF version needs a few soldring skills, because you'll have to solder a DIL64 socket above the processor.
>
> STE version is solder free.
>
> I sell these interfaces 30 EURO each (including interface, cable and floppy disk with free driver versions)
> For the shipping cost (with tracking) : 2,50 EURO to France. 5.50 EURO to Europe, 7 EURO worldwide.
>
> 10 pièces of each cartegory are still remaining at this time.
>
> contact me at atari.ide@gmail.com for any questions or pictures.
>
> Thank you ;-)
Hi,
well i never tried CD-ROM but it seems to work. I have to try it ;-)
HD works well, since it is a 3"1/2 version, you'll have to use an adaptater if you want to connect a 2"1/2 hard drive. But it has been tested and works very well ;-)
|
|
|