Apple II+ PSU [message #311634] |
Wed, 10 February 2016 01:34 |
oz390gta
Messages: 71 Registered: March 2013
Karma: 0
|
Member |
|
|
I have an Apple II+ (EuroPlus) which has this weird power issue in that the switch on the back did not work, that is, when you plugged in the power cord it booted. I thought it might be the PSU so I purchased another known working PSU. I have just plugged that in and the issue still exists. The machine boots as soon as I plug in the power cord regardless of the position of the on/off switch.
Any ideas?
ctb
|
|
|
Re: Apple II+ PSU [message #311636 is a reply to message #311634] |
Wed, 10 February 2016 01:56 |
|
Originally posted by: Fred Smith
On 2016-02-10, oz390gta@gmail.com <oz390gta@gmail.com> wrote:
> I have an Apple II+ (EuroPlus) which has this weird power issue
> in that the switch on the back did not work, that is, when you
> plugged in the power cord it booted. I thought it might be the PSU
> so I purchased another known working PSU. I have just plugged that
> in and the issue still exists. The machine boots as soon as I plug
> in the power cord regardless of the position of the on/off switch.
>
> Any ideas?
>
> ctb
Two broken (always on) power switches? Actually I remember
europlusses with a replacement toggle switch from years ago. Might
be a common failure if it's happened twice to you as well.
|
|
|
Re: Apple II+ PSU [message #311663 is a reply to message #311634] |
Wed, 10 February 2016 12:55 |
gids.rs
Messages: 1395 Registered: October 2012
Karma: 0
|
Senior Member |
|
|
On Wednesday, February 10, 2016 at 12:34:23 AM UTC-6, oz39...@gmail.com wrote:
> I have an Apple II+ (EuroPlus) which has this weird power issue in that the switch on the back did not work, that is, when you plugged in the power cord it booted. I thought it might be the PSU so I purchased another known working PSU. I have just plugged that in and the issue still exists. The machine boots as soon as I plug in the power cord regardless of the position of the on/off switch.
>
> Any ideas?
>
> ctb
Use a continuity tester to test the switches when both on and off. Do I need to state the obvious, make sure power cord is unplugged.
|
|
|
Re: Apple II+ PSU [message #311897 is a reply to message #311634] |
Sun, 14 February 2016 01:06 |
Michael J. Mahon
Messages: 1772 Registered: October 2012
Karma: 0
|
Senior Member |
|
|
On 2/9/2016 10:34 PM, oz390gta@gmail.com wrote:
> I have an Apple II+ (EuroPlus) which has this weird power issue in that the switch on the back did not work, that is, when you plugged in the power cord it booted. I thought it might be the PSU so I purchased another known working PSU. I have just plugged that in and the issue still exists. The machine boots as soon as I plug in the power cord regardless of the position of the on/off switch.
>
> Any ideas?
>
> ctb
The power switch is pretty easy to replace--and the occasional need to
do so is a good argument against cycling the power to re-boot. ;-)
--
-michael
NadaNet 3.1 for Apple II parallel computing!
Home page: http://michaeljmahon.com
"The wastebasket is our most important design
tool--and it's seriously underused."
|
|
|
Re: Apple II+ PSU [message #311904 is a reply to message #311897] |
Sun, 14 February 2016 01:55 |
David Schmidt
Messages: 994 Registered: October 2012
Karma: 0
|
Senior Member |
|
|
On 2/14/2016 1:06 AM, Michael J. Mahon wrote:
> The power switch is pretty easy to replace--and the occasional need to
> do so is a good argument against cycling the power to re-boot. ;-)
But the lack of an open-apple key makes it tough to really get in there
and reboot hard, especially with tricky/nasty reset hooks.
|
|
|
Re: Apple II+ PSU [message #311912 is a reply to message #311904] |
Sun, 14 February 2016 08:16 |
retrogear
Messages: 245 Registered: November 2012
Karma: 0
|
Senior Member |
|
|
On Sunday, February 14, 2016 at 12:55:51 AM UTC-6, schmidtd wrote:
> On 2/14/2016 1:06 AM, Michael J. Mahon wrote:
>> The power switch is pretty easy to replace--and the occasional need to
>> do so is a good argument against cycling the power to re-boot. ;-)
>
> But the lack of an open-apple key makes it tough to really get in there
> and reboot hard, especially with tricky/nasty reset hooks.
An Apple II+ was my first computer in 1983. After a few years of power switch reboots, I soldered a switch from the NMI to ground as a bailout button (and for software cracking). I've just reconstructed a II+ from parts to re-experience my past and now am worried about wearing out my power switch so this time it's plugged into a power strip :)
Larry G
|
|
|
Re: Apple II+ PSU [message #312035 is a reply to message #311912] |
Mon, 15 February 2016 17:17 |
Howard Poe
Messages: 58 Registered: January 2013
Karma: 0
|
Member |
|
|
On Sunday, February 14, 2016 at 5:16:40 AM UTC-8, retrogear wrote:
> On Sunday, February 14, 2016 at 12:55:51 AM UTC-6, schmidtd wrote:
>> On 2/14/2016 1:06 AM, Michael J. Mahon wrote:
>>> The power switch is pretty easy to replace--and the occasional need to
>>> do so is a good argument against cycling the power to re-boot. ;-)
>>
>> But the lack of an open-apple key makes it tough to really get in there
>> and reboot hard, especially with tricky/nasty reset hooks.
>
> An Apple II+ was my first computer in 1983. After a few years of power switch reboots, I soldered a switch from the NMI to ground as a bailout button (and for software cracking). I've just reconstructed a II+ from parts to re-experience my past and now am worried about wearing out my power switch so this time it's plugged into a power strip :)
>
> Larry G
The Kensington System Saver and equivalents are really nice for this, one handy power switch for the complete system with surge suppression and additional cooling, all in one.
|
|
|
Re: Apple II+ PSU [message #312069 is a reply to message #312035] |
Tue, 16 February 2016 00:40 |
Michael J. Mahon
Messages: 1772 Registered: October 2012
Karma: 0
|
Senior Member |
|
|
Howard Poe <hojopo@gmail.com> wrote:
> On Sunday, February 14, 2016 at 5:16:40 AM UTC-8, retrogear wrote:
>> On Sunday, February 14, 2016 at 12:55:51 AM UTC-6, schmidtd wrote:
>>> On 2/14/2016 1:06 AM, Michael J. Mahon wrote:
>>>> The power switch is pretty easy to replace--and the occasional need to
>>>> do so is a good argument against cycling the power to re-boot. ;-)
>>>
>>> But the lack of an open-apple key makes it tough to really get in there
>>> and reboot hard, especially with tricky/nasty reset hooks.
>>
>> An Apple II+ was my first computer in 1983. After a few years of power
>> switch reboots, I soldered a switch from the NMI to ground as a bailout
>> button (and for software cracking). I've just reconstructed a II+ from
>> parts to re-experience my past and now am worried about wearing out my
>> power switch so this time it's plugged into a power strip :)
>>
>> Larry G
>
> The Kensington System Saver and equivalents are really nice for this, one
> handy power switch for the complete system with surge suppression and
> additional cooling, all in one.
>
Yep--that's been my solution since I used a ][+. ;-)
--
-michael - NadaNet 3.1 and AppleCrate II: http://michaeljmahon.com
|
|
|