| A German user here ??? [message #305455] |
Sun, 29 November 2015 10:57  |
Guillaume Tello
Messages: 60
Registered: October 2012
Karma: 0
|
Member |
|
|
Hello,
I need some confirmation about a german document about the Hades.
Here is the original text:
*******
Hardware
Allgemein
Der Hades wird normalerweise mit der Bustaktfrequenz von 32 MHz
ausgeliefert, ausser beim MC68060RC50, dort ist sie 30 MHz.
Bei den Transferraten sind jeweils die ben”tigten Bustakte angegeben.
Prozessor
Als Prozessoren lassen sich der MC68040 oder der MC68060 einsetzen.
Beide Prozessoren haben als Prozessorclock den doppelten Bustakt.
*******
Here is a summary of what I understand:
If the Hades has a MC68060RC50, then the bus frequency is 30MHz.
Else, it is 32MHz.
The Processor frequency is the double of the bus frequency:
so the Hades is clocked at either 60 or 64MHz depending on its processor.
Am I right???
Thanks a lot.
Guillaume.
Link: http://www.medusacomputer.com/program/Hadessh.zip
the text is taken from the file DOKU0101.TXT.
|
|
|
|
|
|
| Re: A German user here ??? [message #305457 is a reply to message #305456] |
Sun, 29 November 2015 14:09  |
Guillaume Tello
Messages: 60
Registered: October 2012
Karma: 0
|
Member |
|
|
Le 29/11/2015 19:42, Dennis Schulmeister a écrit :
> On Sun, 29 Nov 2015 16:57:21 +0100
> Arachide <houten.van@orange.fr> wrote:
>
>> Am I right???
>
> Yes. The text also says that the processor can either be MC68040 or
> MC68060.
>
> Greetings from Germany. :-)
>
> Dennis
>
Many thanks !
Some are still thinking that the Hades is clocked at 120MHz...
Best regards,
Guillaume.
|
|
|
|
| Re: A German user here ??? [message #305461 is a reply to message #305457] |
Sun, 29 November 2015 17:45 |
Francois LE COAT
Messages: 225
Registered: August 2012
Karma: 0
|
Senior Member |
|
|
Hi,
Arachide writes:
> Dennis Schulmeister writes:
>> Arachide wrote:
>>> Am I right???
>>
>> Yes. The text also says that the processor can either be MC68040 or
>> MC68060.
>>
>> Greetings from Germany. :-)
>>
> Many thanks !
> Some are still thinking that the Hades is clocked at 120MHz...
MC68060 processor of my Hades060 is internally clocked at 120MHz.
That means that the Kronos benchmarks gives 120MIPS with 60MHz
external clock of the CPU, because the MC68060 is "superscalar".
Maybe you're making confusion about people you're speaking with.
ATARIstically yours =)
--
François LE COAT
Author of Eureka 2.12 (2D Graph Describer, 3D Modeller)
http://eureka.atari.org/
|
|
|
|
| Re: A German user here ??? [message #305462 is a reply to message #305461] |
Sun, 29 November 2015 18:29 |
|
|
Originally posted by: Michael Schwingen
On 2015-11-29, Francois LE COAT <lecoat@atari.org> wrote:
>
> MC68060 processor of my Hades060 is internally clocked at 120MHz.
No, it is not. The MC68060 is superscalar (for integer, not floating-point),
meaning it executes up to two integer instructions per clock cycle (in
certain conditions). That means given the right instructions, it runs
(nearly) *as fast as* a theoretical singlescalar CPU which runs at 120MHz,
but the internal logic of the MC68060 is nevertheless only clocked at 60MHz.
Also, with worst-case code, it falls back to singlescalar operation (see
section 10.1 in the datasheet).
The datasheet is quite clear in stating that internal logic is clocked at
"clk" pin speed, not 2*"clk".
cu
Michael
|
|
|
|
| Re: A German user here ??? [message #305463 is a reply to message #305462] |
Sun, 29 November 2015 18:46 |
Francois LE COAT
Messages: 225
Registered: August 2012
Karma: 0
|
Senior Member |
|
|
Hi,
Michael Schwingen writes:
>> MC68060 processor of my Hades060 is internally clocked at 120MHz.
>
> No, it is not. The MC68060 is superscalar (for integer, not floating-point),
> meaning it executes up to two integer instructions per clock cycle (in
> certain conditions). That means given the right instructions, it runs
> (nearly) *as fast as* a theoretical singlescalar CPU which runs at 120MHz,
> but the internal logic of the MC68060 is nevertheless only clocked at 60MHz.
> Also, with worst-case code, it falls back to singlescalar operation (see
> section 10.1 in the datasheet).
>
> The datasheet is quite clear in stating that internal logic is clocked at
> "clk" pin speed, not 2*"clk".
I won't argue. It's written 120MHz on the face side of the computer.
This has a meaning, because with the same external clock frequency,
60MHz and with a MC68040 CPU, it should be written 60MHz on the Hades040
Well, but I have a Hades060 machine since about twenty years now. I made
benchmarks, and it is fast as it was announced on its face side !
I'm not arguing about the Motorola's documentation, but real hardware.
ATARIstically yours,
--
François LE COAT
Author of Eureka 2.12 (2D Graph Describer, 3D Modeller)
http://eureka.atari.org/
|
|
|
|
|
|
| Re: A German user here ??? [message #305479 is a reply to message #305463] |
Mon, 30 November 2015 08:26 |
|
|
Originally posted by: Michael Schwingen
On 2015-11-29, Francois LE COAT <lecoat@atari.org> wrote:
>
> I won't argue. It's written 120MHz on the face side of the computer.
That is then plainly wrong.
> This has a meaning, because with the same external clock frequency,
> 60MHz and with a MC68040 CPU, it should be written 60MHz on the Hades040
>
> Well, but I have a Hades060 machine since about twenty years now. I made
> benchmarks, and it is fast as it was announced on its face side !
It may be run as fast as a 68040 clocked at 120MHz, bit it *is not clocked*
internally at 120MHz - that's the thing about being superscalar.
There is an important difference: a superscalar CPU will only get that
performance some of the time - it is not always 2* speed, it depends on the
mix of instructions - only some can be dispatched to the second execution
pipeline.
> I'm not arguing about the Motorola's documentation, but real hardware.
This *is* the documentation for the real hardware - you won't get it any
more exact than from the manufacturer of the CPU.
cu
Michael
|
|
|
|
| Re: A German user here ??? [message #305500 is a reply to message #305479] |
Tue, 01 December 2015 16:15 |
Francois LE COAT
Messages: 225
Registered: August 2012
Karma: 0
|
Senior Member |
|
|
Hi,
Michael Schwingen writes:
> Francois LE COAT wrote:
>> I won't argue. It's written 120MHz on the face side of the computer.
>
> That is then plainly wrong.
There's cabled green LEDs displaying "120" for 120MHz on the face side.
It was shipped like this by Medusa Systems, and the advertisements for
the computer said the Hades060 was clocked at 120MHz:
< http://download.abandonware.org/magazines/ST%20Magazine/stma gazine_numero121/st%20magazine%20-%20N121%20-%20novembre%201 997%20-%20page083.jpg>
Do you intend to say that Fredi Aschwanden was a liar shipping very
expensive hardware, with false characteristics ? I don't think so.
>> This has a meaning, because with the same external clock frequency,
>> 60MHz and with a MC68040 CPU, it should be written 60MHz on the Hades040
>>
>> Well, but I have a Hades060 machine since about twenty years now. I made
>> benchmarks, and it is fast as it was announced on its face side !
>
> It may be run as fast as a 68040 clocked at 120MHz, bit it *is not clocked*
> internally at 120MHz - that's the thing about being superscalar.
Yes, I know. MC68060 has a double pipeline handling two consecutive
instructions at the same time, what is doubling the execution rate.
> There is an important difference: a superscalar CPU will only get that
> performance some of the time - it is not always 2* speed, it depends on the
> mix of instructions - only some can be dispatched to the second execution
> pipeline.
Two instructions are executed in parallel at the same time with the
double pipeline, considering that these instructions are independent.
The full speed can only be obtained in this case, otherwise the
pipeline is broken. This is the responsibility of the compiler to
dispatch independent consecutive instructions to obtain full speed.
>> I'm not arguing about the Motorola's documentation, but real hardware.
>
> This *is* the documentation for the real hardware - you won't get it any
> more exact than from the manufacturer of the CPU.
The documentation is free, but the Hades060 cost me 3000Euros in 1996.
That was the first Hades ever sold in France, that launched the market.
ATARIstically yours,
--
François LE COAT
Author of Eureka 2.12 (2D Graph Describer, 3D Modeller)
http://eureka.atari.org/
|
|
|
|
| Re: A German user here ??? [message #305524 is a reply to message #305500] |
Wed, 02 December 2015 15:46 |
|
|
Originally posted by: Michael Schwingen
On 2015-12-01, Francois LE COAT <lecoat@atari.org> wrote:
>
> < http://download.abandonware.org/magazines/ST%20Magazine/stma gazine_numero121/st%20magazine%20-%20N121%20-%20novembre%201 997%20-%20page083.jpg>
>
> Do you intend to say that Fredi Aschwanden was a liar shipping very
> expensive hardware, with false characteristics ? I don't think so.
Call it what you like, 120MHz is plain wrong.
> Yes, I know. MC68060 has a double pipeline handling two consecutive
> instructions at the same time, what is doubling the execution rate.
*up to* two, not always two. Look in the manual ...
> Two instructions are executed in parallel at the same time with the
> double pipeline, considering that these instructions are independent.
> The full speed can only be obtained in this case, otherwise the
> pipeline is broken. This is the responsibility of the compiler to
> dispatch independent consecutive instructions to obtain full speed.
You can't control legacy code, and even the best compiler can't group
instructions whose results depend on each other.
I'm not arguing about the speed: the 68060 is a nice CPU (I still have my
hand-soldered Milan 060). The MC68060 may perform like 120MHz (with some
code), but it is most definitely not *clocked* at 120MHz internally.
cu
Michael
|
|
|
|
| Re: A German user here ??? [message #305533 is a reply to message #305524] |
Thu, 03 December 2015 02:40 |
Guillaume Tello
Messages: 60
Registered: October 2012
Karma: 0
|
Member |
|
|
Le 02/12/2015 21:46, Michael Schwingen a écrit :
> On 2015-12-01, Francois LE COAT <lecoat@atari.org> wrote:
>>
>> < http://download.abandonware.org/magazines/ST%20Magazine/stma gazine_numero121/st%20magazine%20-%20N121%20-%20novembre%201 997%20-%20page083.jpg>
>>
>> Do you intend to say that Fredi Aschwanden was a liar shipping very
>> expensive hardware, with false characteristics ? I don't think so.
>
> Call it what you like, 120MHz is plain wrong.
We had the same debate on the french group fr.comp.sys.atari.
Whatever our arguments, François never changed his mind.
The best argument is the one directly from Medusa Systems that wrote to me:
********
Hello
I have checked.
Bus clk 32MHz
CPU clk 64MHz x 2 integer unit = 128MHz integer performence
********
(the bus is 30 or 32 MHz according to some CPU versions)
So the 120 (or 128MHz) is only a calculation of a supposed performance
in the best case. This is not a clock nor a mysterious internal frequency.
But François goes on with "I have a 120MHz CPU".
Guillaume.
|
|
|
|
| Re: A German user here ??? [message #305535 is a reply to message #305533] |
Thu, 03 December 2015 07:29 |
|
|
Originally posted by: calimero
On Thursday, December 3, 2015 at 8:40:31 AM UTC+1, Arachide wrote:
> Le 02/12/2015 21:46, Michael Schwingen a écrit :
>> On 2015-12-01, Francois LE COAT <lecoat@atari.org> wrote:
>>>
>>> < http://download.abandonware.org/magazines/ST%20Magazine/stma gazine_numero121/st%20magazine%20-%20N121%20-%20novembre%201 997%20-%20page083.jpg>
>>>
>>> Do you intend to say that Fredi Aschwanden was a liar shipping very
>>> expensive hardware, with false characteristics ? I don't think so.
>>
>> Call it what you like, 120MHz is plain wrong.
>
> We had the same debate on the french group fr.comp.sys.atari.
> Whatever our arguments, François never changed his mind.
>
> The best argument is the one directly from Medusa Systems that wrote to me:
>
> ********
> Hello
>
> I have checked.
> Bus clk 32MHz
> CPU clk 64MHz x 2 integer unit = 128MHz integer performence
> ********
>
> (the bus is 30 or 32 MHz according to some CPU versions)
>
> So the 120 (or 128MHz) is only a calculation of a supposed performance
> in the best case. This is not a clock nor a mysterious internal frequency..
>
> But François goes on with "I have a 120MHz CPU".
nice debate :) let me add some more fuel :)
please take a look at wikipedia Talk Page about 80486 - there was claim from Apple that 68040 in Macintosh Performa are clocked at 80MHz! LINK: https://en.wikipedia.org/wiki/Talk:Intel_80486#040-based_Mac intosh
You will also find explanation for such claim in Rodolphe Czuba article linked at Wikipedia Talk page...
|
|
|
|
| Re: A German user here ??? [message #305537 is a reply to message #305535] |
Thu, 03 December 2015 13:13 |
Guillaume Tello
Messages: 60
Registered: October 2012
Karma: 0
|
Member |
|
|
Le 03/12/2015 13:29, calimero a écrit :
> nice debate :) let me add some more fuel :)
>
> please take a look at wikipedia Talk Page about 80486 -
>there was claim from Apple that 68040 in Macintosh Performa are
>clocked at 80MHz! LINK:
> https://en.wikipedia.org/wiki/Talk:Intel_80486#040-based_Mac intosh
Very interesting!
According to the Freescale PDF documentation about de MC68040, there are
two cloks:
BCLK: the clock for the bus operations.
PCLK; the clock for the processor operations
And it is said tha PCLK is twice BCLK, but in the sense that the
designer of the mother board must provide two inputs clocks with one
running at twice the speed of the other.
The docs then explains that the processor can be clocked at 25, 33 or 40
MHz for PCLK. So BCLK must be 12,5 or 16,5 or 20MHz.
There is no clock doubling.
And the overclocking is hard: I have a 33MHz CPU in my Quadra and an
accelerator that runs fine until 39MHz but then the system hangs at
40..! 33 to 39 is +18%. Not more.
Guillaume.
|
|
|
|
| Re: A German user here ??? [message #305539 is a reply to message #305533] |
Thu, 03 December 2015 15:40 |
Francois LE COAT
Messages: 225
Registered: August 2012
Karma: 0
|
Senior Member |
|
|
Hi,
Arachide writes:
> Michael Schwingen writes:
>> Francois LE COAT wrote:
>>> < http://download.abandonware.org/magazines/ST%20Magazine/stma gazine_numero121/st%20magazine%20-%20N121%20-%20novembre%201 997%20-%20page083.jpg>
>>>
>>> Do you intend to say that Fredi Aschwanden was a liar shipping very
>>> expensive hardware, with false characteristics ? I don't think so.
>>
>> Call it what you like, 120MHz is plain wrong.
>
> We had the same debate on the french group fr.comp.sys.atari.
> Whatever our arguments, François never changed his mind.
>
> The best argument is the one directly from Medusa Systems that wrote to me:
>
> ********
> Hello
>
> I have checked.
> Bus clk 32MHz
> CPU clk 64MHz x 2 integer unit = 128MHz integer performence
> ********
>
> (the bus is 30 or 32 MHz according to some CPU versions)
>
> So the 120 (or 128MHz) is only a calculation of a supposed performance
> in the best case. This is not a clock nor a mysterious internal frequency.
>
> But François goes on with "I have a 120MHz CPU".
It is written 120MHz in the advert, and my Hades060 displays "120" for
120MHz on the face side. I can't rewrite the history like it was in
1996, when I bought this machine. If you tell me that the Hades060 is
clocked at 60MHz, I can admit this. But it wasn't announced like this
20 years ago. It wasn't essentially a simple mistake. I think the
Hades060 was competing contemporary Pentium PCs. You can't say your
Falcon CT060 competes any other machine twenty years after. Jealous !
I don't regret anything buying my Hades060, in 1996 when I got it :-)
ATARIstically yours =)
--
François LE COAT
Author of Eureka 2.12 (2D Graph Describer, 3D Modeller)
http://eureka.atari.org/
|
|
|
|
| Re: A German user here ??? [message #305549 is a reply to message #305539] |
Fri, 04 December 2015 01:31 |
Miro Kropáček
Messages: 23
Registered: November 2012
Karma: 0
|
Junior Member |
|
|
>> But François goes on with "I have a 120MHz CPU".
>
> It is written 120MHz in the advert, and my Hades060 displays "120" for
> 120MHz on the face side.
It must be true then! I guess you believe your TV in similar way. ;-)
> But it wasn't announced like this 20 years ago. It wasn't essentially a simple mistake.
The sad truth is that Atari market, like any other market, was filled with not-so-truthful claims. I remember the AB040 advertised with the BCLK clock (claiming that the AB040 is capable of running at 64 MHz), a proof that it's total BS was part of CT2 documents (which was, in retrospective, also advertised with full of lies, "easy installation" anyone? ;-)).
|
|
|
|
| Re: A German user here ??? [message #305550 is a reply to message #305537] |
Fri, 04 December 2015 04:30 |
|
|
Originally posted by: Michael Schwingen
On 2015-12-03, Arachide <houten.van@orange.fr> wrote:
> According to the Freescale PDF documentation about de MC68040, there are
> two cloks:
>
> BCLK: the clock for the bus operations.
> PCLK; the clock for the processor operations
>
> And it is said tha PCLK is twice BCLK, but in the sense that the
> designer of the mother board must provide two inputs clocks with one
> running at twice the speed of the other.
>
> The docs then explains that the processor can be clocked at 25, 33 or 40
> MHz for PCLK. So BCLK must be 12,5 or 16,5 or 20MHz.
Exactly. Basically, that means the bus can run at either the same as the
internal clock or half the internal clock. On the Milan, we used the
half-speed option (not sure what the hades did), since that nicely fits with
60ns EDO memory - running the bus faster than the memory yields no
improvement. When using SDRAM (which came available later), running the bus
at 60MHz works fine (but I doubt the performance gain will be high, due to
the sufficiently large caches of the '060).
> And the overclocking is hard: I have a 33MHz CPU in my Quadra and an
> accelerator that runs fine until 39MHz but then the system hangs at
> 40..! 33 to 39 is +18%. Not more.
Yup - I have the impression the later chips ('040 and '060) are closer to
the specified limits than the earlier ones. I was able to run a 68HC000-16
stable at 36MHz (with zero-waitstate fast RAM). That beast was
significantly faster on real work (compiling using PureC) than a 33MHz 68030
with only ST-RAM and external caches ...
cu
Michael
|
|
|
|
Members
Search
Help
Register
Login
Home
