Home »
Digital Archaeology »
Computer Arcana »
Apple »
PowerPC Macs »
Need the pinout for the power connection on the Cinema HD 22 DVI display
Need the pinout for the power connection on the Cinema HD 22 DVI display [message #258196] |
Fri, 27 June 2014 19:14 |
faithie999
Messages: 9 Registered: August 2012
Karma: 0
|
Junior Member |
|
|
i was given the above monitor, but no power supply. the cheapest one i can
find is $80 which is an amount i don't want to invest into this monitor.
to make sure i've identified the monitor properly, it has a "ring" on the
cable from which emanates the cable into the monitor, the power cable, a
usb cable, and the DVI connector.
i was wondering if anyone has one of these monitors who would be willing to
use a voltmeter on the monitor's power supply to determine the pinout. the
power supply is 16V DC, 65 watts. there are two larger and one smaller pin
on the power cable going into the monitor, so i assume the larger ones are
+16v and ground, and the smaller one is either another ground, or just a
locating pin for the connector to be properly aligned into the power supply
jack.
thanks in advance
ken baker
--
--
You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to g3-5-list@googlegroups.com
For more options, visit this group at http://groups.google.com/group/g3-5-list
---
You received this message because you are subscribed to the Google Groups "G-Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email to g3-5-list+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
|
|
|
Goto Forum:
Current Time: Wed Apr 24 03:54:44 EDT 2024
Total time taken to generate the page: 0.04588 seconds