Home »
Digital Archaeology »
Computer Arcana »
Atari »
Atari 8-bit »
Null Modem Cable using ICD PR: or ICD MIO
Null Modem Cable using ICD PR: or ICD MIO [message #166261] |
Mon, 04 November 2013 16:32 |
Barry
Messages: 38 Registered: March 2008
Karma: 0
|
Member |
|
|
Greetings,
Anyone reading this group or know of someone who
has used or is using a ICD PR: Connection or ICD MIO with
a NULL Modem Cable between an Atari 8-bit and PC or
Atari 8-bit and a Atari ST/STe/Falcon???
Want to transfer alot of files from one machine to the other.
If so, would like some info on what software will allow this
on the Atari 8-bit. I think BobTerm might work, but not sure
if that's the only program I could use on the Atari 8-bit.
Would like to Null Modem Connect a 800XL with a
STE or Atari Falcon 030.
And a 800XL with a PC Laptop.
I have a ICD PR: Connection and a ICD MIO.
Could use info, on software and settings to use for a
basis to get started without going through alot of stuff
that will be a waste of time.
phantomm@suddenlink.net
|
|
|
Goto Forum:
Current Time: Thu Apr 18 03:14:48 EDT 2024
Total time taken to generate the page: 0.37471 seconds