Atari Laser Printer [message #148856] |
Sat, 07 September 2013 08:48 |
Guillaume Tello
Messages: 60 Registered: October 2012
Karma: 0
|
Member |
|
|
Hello,
I want to know if the Atari SLM804 requires the little box SLMC804 to
work? Or can it be connected directly to the Atari ST ?
Is it right that the toner is the same as other machines and can be
easely found?
Thanks!
Guillaume.
|
|
|
Re: Atari Laser Printer [message #148857 is a reply to message #148856] |
Sat, 07 September 2013 12:57 |
|
Originally posted by: Mudge
On 2013-09-07 06:48:40 -0600, Guillaume Tello said:
> I want to know if the Atari SLM804 requires the little box SLMC804 to
> work? Or can it be connected directly to the Atari ST ?
When I had one (in 1990) it connexcted directly
> Is it right that the toner is the same as other machines and can be
> easely found?
It was the same as other toners used a quarter century ago - I have no
idea about now !
--
The Canadian Curmudgeon (surprised that this equipment still exists,
but not in Calgary)
Remove noxious CO2 - plant many trees
|
|
|
Re: Atari Laser Printer [message #148858 is a reply to message #148857] |
Sat, 07 September 2013 18:02 |
Ken Springer
Messages: 41 Registered: March 2012
Karma: 0
|
Member |
|
|
On 9/7/13 10:57 AM, Mudge wrote:
> On 2013-09-07 06:48:40 -0600, Guillaume Tello said:
>
>> I want to know if the Atari SLM804 requires the little box SLMC804 to
>> work? Or can it be connected directly to the Atari ST ?
>
> When I had one (in 1990) it connexcted directly
I don't believe Mudge is correct. I just looked at mine, the 804
connects to the controller (SLMC804) with a SCSI 1 cable. Then the
controller connects to the computer through the ACSI port.
>> Is it right that the toner is the same as other machines and can be
>> easely found?
>
> It was the same as other toners used a quarter century ago - I have no
> idea about now !
I seem to remember there was something different about the toner itself,
if you were into refilling your own cartridges. I'm thinking the toner
was finer.
Replacement cartridge kits would fit TEC LB-1301, Buffalo, DTP, Kaypro,
Memory, Memorex Microphonix,Oasys, and TEC lasers. Got these name
brands from a replacement toner cart box, but didn't take the time to
write the model numbers. If you want the model numbers, send an email
to this address, and I'll scan the entire label and email it to you.
--
Ken
Mac OS X 10.8.4
Firefox 23.0
Thunderbird 17.0.8
LibreOffice 4.1.04
|
|
|
Re: Atari Laser Printer [message #148859 is a reply to message #148858] |
Sun, 08 September 2013 13:41 |
|
Originally posted by: Mudge
On 2013-09-07 16:02:04 -0600, Ken Springer said:
> I don't believe Mudge is correct. I just looked at mine, the 804
> connects to the controller (SLMC804) with a SCSI 1 cable. Then the
> controller connects to the computer through the ACSI port.
I rented one to print my daughter's thesis - and I had no controller -
it connected to my ST with a scuzzi cable and made so much air
pollution in my basement office I decided not to buy it and went back
to my old dot matrix printer when I was finished the thesis print job !
--
The Canadian Curmudgeon (in Calgary)
Remove noxious CO2 - plant many trees
|
|
|