Modem software [message #117213] |
Mon, 23 September 2013 16:04 |
lawrence
Messages: 105 Registered: July 2012
Karma: 0
|
Senior Member |
|
|
Message-ID: <770@decwrl.UUCP>
Date: Wed, 27-Feb-85 11:15:32 EST
Article-I.D.: decwrl.770
Posted: Wed Feb 27 11:15:32 1985
Date-Received: Fri, 1-Mar-85 21:01:58 EST
Sender: daemon@decwrl.UUCP
Organization: DEC Engineering Network
Lines: 14
Xref: watmath net.micro.cpm:3639 net.wanted:5905
I am looking for modem/terminal software for an S-100 CP/M system running
a Z80 system with a CCS 2810 CPU and 2719 I/O board. I am looking to see
if I can down load files from a CP/M system to a Commodore 64 in order to
save these files on the Commodore disk drive. It need not be complex,
since I only need the software to down load at the moment. If anyonh has any
modem hardware (schematics, etc) that would be helpful, too.
Sent replies on the net, then I can send you my address.
|
|
|
Re: Modem software [message #118341 is a reply to message #117213] |
Tue, 24 September 2013 14:12 |
ABN.ISCAMS
Messages: 117 Registered: May 2013
Karma: 0
|
Senior Member |
|
|
Message-ID: <8796@brl-tgr.ARPA>
Date: Thu, 28-Feb-85 21:02:25 EST
Article-I.D.: brl-tgr.8796
Posted: Thu Feb 28 21:02:25 1985
Date-Received: Mon, 4-Mar-85 05:44:11 EST
Sender: news@brl-tgr.ARPA
Lines: 18
Friend,
Re your wanting modem/terminal software for a CP/M system to download to
a Commodore 64...
If you want to do this Thing back-to-back (e.g., not over a telephone), you
could do it through a straight RS-232 connection! PIP will do an XON/XOFF
transfer (>PIP LST:=FOOBAR.TXT[B]). They sell RS-232 converters for
the C64 via mail order for about $39, and the latest Byte (I think) had
a simple board for that .
If you truly need modem software, get back with me and I'll point you
to MODEM7xx.
Regards,
David Kirschbaum
Toad Hall
(ABN.ISCAMS@USC-ISID.ARPA)
|
|
|
Re: Modem software [message #118349 is a reply to message #117213] |
Tue, 24 September 2013 14:12 |
shor
Messages: 21 Registered: June 2013
Karma: 0
|
Junior Member |
|
|
Message-ID: <223@sphinx.UChicago.UUCP>
Date: Sun, 3-Mar-85 21:25:52 EST
Article-I.D.: sphinx.223
Posted: Sun Mar 3 21:25:52 1985
Date-Received: Mon, 4-Mar-85 20:47:28 EST
References: <8796@brl-tgr.ARPA>
Organization: U. Chicago - Computation Center
Lines: 15
[]
> From: ABN.ISCAMS@USC-ISID.ARPA
> If you want to do this Thing back-to-back (e.g., not over a telephone), you
> could do it through a straight RS-232 connection!
You can do it with PIP, but if you want to get two side-by-side computers
talking, but dollars to doughnuts you're gonna need a null modem cable.
--
Melinda Shore
University of Chicago Computation Center
uucp: ...!ihnp4!gargoyle!sphinx!shor
Mailnet: staff.melinda@uchicago.mailnet
Bitnet: shor%sphinx@uchicago.bitnet
ARPA: staff.melinda%uchicago.mailnet@mit-multics.arpa
|
|
|