Megalextoria
Retro computing and gaming, sci-fi books, tv and movies and other geeky stuff.

Home » Archive » net.micro.cpm » S-100 div./696 corp
Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend 
Switch to threaded view of this topic Create a new topic Submit Reply
S-100 div./696 corp [message #112242] Mon, 16 September 2013 13:41
klotz is currently offline  klotz
Messages: 9
Registered: May 2013
Karma: 0
Junior Member
Message-ID: <6740@brl-tgr.ARPA>
Date: Sat, 22-Dec-84 12:25:46 EST
Article-I.D.: brl-tgr.6740
Posted: Sat Dec 22 12:25:46 1984
Date-Received: Thu, 27-Dec-84 02:22:04 EST
Sender: news@brl-tgr.ARPA
Organization: Ballistic Research Lab
Lines: 26

As many of you probably know, pixel corporatoin offered some winchester
disk drives at remarkable prices. Well a friend bought one and we started
to look for an interface/controller for the beast.

We called these people, s-100 , and asked if they had an interface card
and they recommended that we buy their DISK 2 controller from Compupro.
They assured us that this card was the proper interface for the SA1004.

We order the card and at the same time order the manual from Shugart.
The card came in about a month ago and the manual came last week. After
careful investigation it became apparent that the two did not go together.

We called the company and talked to the Technical Manager. He insists that
there is only one standard for 8 inch Winchester disk. He has never heard
of the SA1000 standard and refused to take the card back since we have had
it for over 30 days. We tried to assure him that the card had not be used,
in fact it is still in the original wrappers. So we have to eat his mistake.

For those of you who may not know, SA1000 is considered by Western digital
and Xebec to be the most popular standard for the 8 inch drives, and the 
DISK 2 is for the Fujitsu drive and the SA4000, which we could neither find
the drives of the documentation.

The bottom line is that we suggest that no one buy from these people. Meanwhile
we are going to collect documentation for the owner of the company to enlighten
him/her to the actual standard and the ignorance of the "Technical Manager".
  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: summary of s-100 9-track cntrlr query
Next Topic: cp/m+ incompatibility
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Thu Jan 27 15:35:55 EST 2022

Total time taken to generate the page: 0.00467 seconds