Message-ID: <6406@brl-tgr.ARPA>
Date: Thu, 6-Dec-84 15:30:25 EST
Article-I.D.: brl-tgr.6406
Posted: Thu Dec  6 15:30:25 1984
Date-Received: Sun, 9-Dec-84 03:27:38 EST
Sender: news@brl-tgr.ARPA
Organization: Ballistic Research Lab
Lines: 15

Having just gone through that , I can't help but contribute.

I got some brackets with mine.  A pair of drives is joned at the top using the 
3mm mounting holes and the bracket.  The allignment of the US holes on the 
bottom of one of the drives is now exactly where the old single drive holes 
were.  This means that only one of the pair is fastend to the frame directly, 
but it works fine.  I selected a format that is compatible with the 48 tpi and 
thus needs no new ROM.  By using 80 tracks on one side out to in and 80 tracks 
on the other in to out, the prom need not know of 96tpi.  I even run the NS DOS 
( a very old version) unmodified using 40 tracks on each side. (since the 55F 
drives can seek in 3 MS vs 6 MS for the tandon 100-2's I don't notice the long 
seeks that result.  The depth problem disturbs me as I hate to have things 
crammed in....  I am going to replace the cable because I still have one old 
tandom full height and the cable is stretched.  I mounted the teac drives 
"upside down" but will reverse when get new cable.