Megalextoria
Retro computing and gaming, sci-fi books, tv and movies and other geeky stuff.

Home » Archive » net.micro.cpm » Kermit-80 for Compupro Interfacer 3/4
Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend 
Switch to threaded view of this topic Create a new topic Submit Reply
Kermit-80 for Compupro Interfacer 3/4 [message #80617] Mon, 03 June 2013 23:52
SY.FDC%CU20B is currently offline  SY.FDC%CU20B
Messages: 5
Registered: May 2013
Karma: 0
Junior Member
Message-ID: <12681@sri-arpa.UUCP>
Date: Thu, 4-Oct-84 16:05:50 EDT
Article-I.D.: sri-arpa.12681
Posted: Thu Oct  4 16:05:50 1984
Date-Received: Sun, 7-Oct-84 22:04:16 EDT
Lines: 30

From:  Frank da Cruz 

This is to announce KERMIT-80 for Compupro Interfacer 3/4 with CP/M-80 2.2,
based on version 3.9A of CP/M Kermit.  It includes support for:

. Interfacer 3/4 board I/O.
. Terminal control sequences for Wyse Technology WY-100.
. Racal-Vadic Auto Dial VA212 modem
. US Robotics Password modem
. Sending break with  B while CONNECTed.

Contributed by:

	Guy Valiquette, M.D. (PS1.YAAGC@CU20B)
	Black Bldg. Rm 322
	Dept. of Neurology
	College of Physicians & Surgeons
	Columbia University
	630 W. 168th Street
	New York, NY 10032

The source is in KER:CPMPRO.M80.  The hex file is in KER:CPMPRO.HEX, and a
help/installation file is in KER:CPMPRO.HLP.  These files are available via
anonymous FTP from CU20B and COLUMBIA-20 (after 6pm Eastern time).

No attempt was made to build all the other CP/M Kermits from this source, so
for now it will have its own.  It is expected that Compupro IF 3/4 support will
be added to version 4 of CP/M-80 Kermit, the "modular version", soon after
version 4 is released.
-------
  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: PMC Micromate 101 / TRIOS Micro Systems MicroMix 3.0
Next Topic: Re: Rainbow 100 reads IBM diskettes
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Thu Mar 28 14:46:41 EDT 2024

Total time taken to generate the page: 0.00249 seconds