Message-ID: <12203@sri-arpa.UUCP>
Date: Thu, 20-Sep-84 06:48:01 EDT
Article-I.D.: sri-arpa.12203
Posted: Thu Sep 20 06:48:01 1984
Date-Received: Wed, 26-Sep-84 02:16:34 EDT
Lines: 13

From:  Jim Forrest 

I have been looking at the Radio Shack Model 4P, on sale this week only
for $999.00. The Model 4 will boot up with CP/M, but the 4P has to be
booted with TRSDOS first and then reset with a CP/M disk in drive 0. And then
sometimes it works and sometimes it does not.

The only mention of CP/M for the Model 4P is on the box it comes in. Does
anyone have any experience with CP/M on the Model 4P? Would appreciate
any help in getting CP/M running consistently on this machine.

Jim
-------

Message-ID: <12392@sri-arpa.UUCP>
Date: Wed, 26-Sep-84 11:01:35 EDT
Article-I.D.: sri-arpa.12392
Posted: Wed Sep 26 11:01:35 1984
Date-Received: Sun, 30-Sep-84 04:13:55 EDT
Lines: 18

From:      Robert Lee Feider (CTAB) 

     I have used a model 4p, running CP/M, about 6 months ago so my memory
may be failing me. I don't remember having the problem you describe. I had
a copy of CP/M plus for the model 4 and the disk booted right up in CP/M
on the 4p without having to go through TRSDOS. Unfortunately I don't have
that machine anymore since it was loaned to me to do some program development
for a client. I do remeber having problems with one of the setup utilities
(cursor type (blinking,not blinking) etc.) but nothing as serious as not
being able to boot up or anything like that. If you could be more specific
as to the problems that occur when it does boot perhaps it may jog my memory
as to what may have also happened to me when using that machine with CP/M
plus.


							LEE@BRL
PS: Sorry I can't be of any help but I am confused by the symptoms you
    described having never encountered them.