Megalextoria
Retro computing and gaming, sci-fi books, tv and movies and other geeky stuff.

Home » Digital Archaeology » Computer Arcana » Commodore » Commodore 8-bit » Advice on the best drive emulator?
Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend 
Switch to threaded view of this topic Create a new topic Submit Reply
Advice on the best drive emulator? [message #414395] Fri, 06 May 2022 10:56 Go to next message
KJAmbrose@gmail.com is currently offline  KJAmbrose@gmail.com
Messages: 63
Registered: March 2005
Karma: 0
Member
Can anyone recommend the preferred drive emulator for making use of .d64 files?
I want to run the .d64 files on my 128 after I have downloaded onto my windows PC.
I see various hardware on the Bay but not sure which will work on a 128 in either mode.
Advice on the best drive emulator? [message #414399 is a reply to message #414395] Fri, 06 May 2022 03:54 Go to previous messageGo to next message
Anonymous
Karma:
Originally posted by: nospam.Daniel.Path

Hello Kenzo,

06 May 22 07:56, you wrote to All:

K> I want to run the .d64 files on my 128 after I have downloaded onto my
K> windows PC.
K> I see various hardware on the Bay but not sure which will work on a
K> 128 in either mode.

SD2IEC works perfectly with a c128, but i think any other device will do. :)

Regards,
--
dp

-=>> telnet://bbs.roonsbbs.hu:1212 <<=-

.... 9:49pm up 32 days, 9:56:24, load: 78 processes, 281 threads.
Re: Advice on the best drive emulator? [message #414400 is a reply to message #414399] Fri, 06 May 2022 15:42 Go to previous messageGo to next message
Paul Förster is currently offline  Paul Förster
Messages: 415
Registered: April 2012
Karma: 0
Senior Member
Hi,

On 06. May, 2022 at 09:54:55 CEST, "Daniel Path" <Daniel Path> wrote:

> SD2IEC works perfectly with a c128, but i think any other device will do. :)

I second that. I love my SD2IEC. 👍

Cheers
Paul
Re: Advice on the best drive emulator? [message #414402 is a reply to message #414400] Fri, 06 May 2022 18:06 Go to previous messageGo to next message
KJAmbrose@gmail.com is currently offline  KJAmbrose@gmail.com
Messages: 63
Registered: March 2005
Karma: 0
Member
On Friday, May 6, 2022 at 12:42:48 PM UTC-7, Paul Förster wrote:
> Hi,
> On 06. May, 2022 at 09:54:55 CEST, "Daniel Path" <Daniel Path> wrote:
>
>> SD2IEC works perfectly with a c128, but i think any other device will do. :)
> I second that. I love my SD2IEC. 👍
>
> Cheers
> Paul
So my physical 1541 prevents the C128 from completing boot up when the drive is powered on and serial cable connected. If I kill the power to the drive while the 128 boot up is hung, the 128 completes booting. Same if I disconnect the serial cable while the 128 is hung on bootup. And the drive does not respond to load command, 128 reports drive not ready.

I opened the drive case, board is internally very clean, and no burnt or bloated caps. I am guessing one or more of the logic chips is bad. Looks like the MOS chips are from 1984. I am using an aftermarket serial cable, the cable pins look correct when compared to online pics, and continuity pin to pin on each end is good. I guess these serial cables are supposed to be pin to pin straight wired.

If I get some ambition in the next few days, I will use my scope to check for activity on the logic chips. My understanding is that with the scope ground on a chip ground and scope lead on address or data pins, I should see high speed voltage oscillation, indicating logic activity...

Hate to give up on all my floppies, even if I pick up an emulator...
Re: Advice on the best drive emulator? [message #414409 is a reply to message #414399] Sat, 07 May 2022 07:27 Go to previous messageGo to next message
Paul Förster is currently offline  Paul Förster
Messages: 415
Registered: April 2012
Karma: 0
Senior Member
Hi Andreas,

On 07. May, 2022 at 01:20:18 CEST, "Andreas Kohlbach" <ank@spamfence.net>
wrote:
> I should have a look at SD2IEC.
>
> Would had recommended VICE, which emulated the C128, C64, PET,
> VIC-20... And accepts .d64 files among others.

yes, I highly recommend both, the SD2IEC solution to replace a physical drive,
and VICE for emulation.

If you use a Mac, there's also VirtualC64 and vAmiga, but these are C64 and
Amiga only, hence excluding the other Commodore 8-Bit machines.

https://vice-emu.sourceforge.io
https://www.c64-wiki.com/wiki/SD2IEC

Cheers
Paul
Re: Advice on the best drive emulator? [message #414410 is a reply to message #414402] Sat, 07 May 2022 07:43 Go to previous messageGo to next message
Paul Förster is currently offline  Paul Förster
Messages: 415
Registered: April 2012
Karma: 0
Senior Member
Hi Kenzo,

On 07. May, 2022 at 00:06:36 CEST, "Kenzo" <kjambrose@gmail.com> wrote:
> So my physical 1541 prevents the C128 from completing boot up when the drive
> is powered on and serial cable connected. If I kill the power to the drive
> while the 128 boot up is hung, the 128 completes booting. Same if I disconnect
> the serial cable while the 128 is hung on bootup. And the drive does not
> respond to load command, 128 reports drive not ready.
>
> I opened the drive case, board is internally very clean, and no burnt or
> bloated caps. I am guessing one or more of the logic chips is bad. Looks like
> the MOS chips are from 1984. I am using an aftermarket serial cable, the cable
> pins look correct when compared to online pics, and continuity pin to pin on
> each end is good. I guess these serial cables are supposed to be pin to pin
> straight wired.
>
> If I get some ambition in the next few days, I will use my scope to check for
> activity on the logic chips. My understanding is that with the scope ground on
> a chip ground and scope lead on address or data pins, I should see high speed
> voltage oscillation, indicating logic activity...
>
> Hate to give up on all my floppies, even if I pick up an emulator...

The usual suspects are:

1. Bad power supply of the external drive.

2. If you have a 128D, you may have a drive number conflict. The internal
drive is #8. If the external drive doesn't have some other number assigned
(usually #9), then you will most likely experience exactly such symptoms.

3. The drive cable has a reset line (see below). Usually, it's wired through,
but I have seen few few cables which have no connection there. Considering
your described symptoms, it may make sense to try with a cable that does NOT
connect the reset line. The downside is that pushing the reset button on the
C128 or even powering it down and up again will not make the drive notice any
change. If you want to reset the drive too, you'd have to do that separately
then.

Reset is on Pin 6:
see http://www.hardwarebook.info/Commodore_Serial_I/O

Cheers
Paul
Re: Advice on the best drive emulator? [message #414416 is a reply to message #414410] Sat, 07 May 2022 23:57 Go to previous messageGo to next message
KJAmbrose@gmail.com is currently offline  KJAmbrose@gmail.com
Messages: 63
Registered: March 2005
Karma: 0
Member
On Saturday, May 7, 2022 at 4:43:36 AM UTC-7, Paul Förster wrote:
> Hi Kenzo,
> On 07. May, 2022 at 00:06:36 CEST, "Kenzo" <kjam...@gmail.com> wrote:
>> So my physical 1541 prevents the C128 from completing boot up when the drive
>> is powered on and serial cable connected. If I kill the power to the drive
>> while the 128 boot up is hung, the 128 completes booting. Same if I disconnect
>> the serial cable while the 128 is hung on bootup. And the drive does not
>> respond to load command, 128 reports drive not ready.
>>
>> I opened the drive case, board is internally very clean, and no burnt or
>> bloated caps. I am guessing one or more of the logic chips is bad. Looks like
>> the MOS chips are from 1984. I am using an aftermarket serial cable, the cable
>> pins look correct when compared to online pics, and continuity pin to pin on
>> each end is good. I guess these serial cables are supposed to be pin to pin
>> straight wired.
>>
>> If I get some ambition in the next few days, I will use my scope to check for
>> activity on the logic chips. My understanding is that with the scope ground on
>> a chip ground and scope lead on address or data pins, I should see high speed
>> voltage oscillation, indicating logic activity...
>>
>> Hate to give up on all my floppies, even if I pick up an emulator...
> The usual suspects are:
>
> 1. Bad power supply of the external drive.
>
> 2. If you have a 128D, you may have a drive number conflict. The internal
> drive is #8. If the external drive doesn't have some other number assigned
> (usually #9), then you will most likely experience exactly such symptoms.
>
> 3. The drive cable has a reset line (see below). Usually, it's wired through,
> but I have seen few few cables which have no connection there. Considering
> your described symptoms, it may make sense to try with a cable that does NOT
> connect the reset line. The downside is that pushing the reset button on the
> C128 or even powering it down and up again will not make the drive notice any
> change. If you want to reset the drive too, you'd have to do that separately
> then.
>
> Reset is on Pin 6:
> see http://www.hardwarebook.info/Commodore_Serial_I/O
>
> Cheers
> Paul
thanks paul,

I also tried a commodore serial cable but still no luck for the first 1541 I tried. I had 3 other drives in storage which I retrieved and tested. A 1571, 1541, and 1541 II.

The 1571 won't power up but using the same power supply the 1541 II works fine. And the second 1541 also works fine. So I have two drives working, but not the 1571 yet.

And I had 4 computers in storage, a 64 and three original type128s. The 64 powers up, but composite connected monitor is blank. I have to do some research for that. Maybe the 64 does not output composite video?

The three 128s all work fine. Next I will try the two 1764 ram expansion modules. The one I have that was boxed comes with a commodore higher powered power supply. I will check the output voltages before powering up with it.

So now that I can read disks, I guess the next step is to clean and lube the drives, and then figure out a way to convert the physical floppies to .d64 files, since I don't expect the drives to work forever.
Re: Advice on the best drive emulator? [message #414417 is a reply to message #414416] Sun, 08 May 2022 01:28 Go to previous messageGo to next message
Paul Förster is currently offline  Paul Förster
Messages: 415
Registered: April 2012
Karma: 0
Senior Member
Hi Kenzo,

On 08. May, 2022 at 05:57:00 CEST, "Kenzo" <kjambrose@gmail.com> wrote:
> The 1571 won't power up but using the same power supply the 1541 II works
> fine. And the second 1541 also works fine. So I have two drives working, but
> not the 1571 yet.

I'm not sure that you can use a 1541-II power supply with a 1571. I'd do some
research before trying that because a bad power supply can not only not power
up the attached device correctly but it can kill it. So I'd be careful when
trying a Commodore power supply with a different device than what it was built
for. You should basically always assume that Commodore power supplies are NOT
interchangeable between devices.

> And I had 4 computers in storage, a 64 and three original type128s. The 64
> powers up, but composite connected monitor is blank. I have to do some
> research for that. Maybe the 64 does not output composite video?

The C64 has a composite signal. It's pin 4 of the connector.

See: http://www.hardwarebook.info/C128/C64C_Video

But your VIC chip may be fried (or the monitor of course). Or it may suffer
from a bad connection. It's hard to say without detailed info. I suggest
taking the VIC chip out and clean the contacts, then put it back in. This can
be easily done if the chip sits in a socket. If it's soldered in then you may
have some soldering to do. But instead of soldering it back in I would put in
a socket.

> The three 128s all work fine. Next I will try the two 1764 ram expansion
> modules. The one I have that was boxed comes with a commodore higher powered
> power supply. I will check the output voltages before powering up with it.

I can't comment on the 1764. I never had one of those.

> So now that I can read disks, I guess the next step is to clean and lube the
> drives, and then figure out a way to convert the physical floppies to .d64
> files, since I don't expect the drives to work forever.

Most things are on the web already in d64 format. You'd have to search hard
for some things, though. But if you want to do the conversion yourself, then
there are several options, of which I can recomment two:

1) if you want to do it on the C64/C128, then use method 4 of:

https://diginoodles.com/writing/media-production/transferrin g-commodore-64-disks-to-modern-formats

2) get a Star Commander cable and connect the drive to a PC running DOS. Then
you can use the Star Commander:
https://sta.c64.org/sc.html

Though the second option is very comfortable and reminiscent of the well known
Norton Commander, it requires an old PC running DOS and having a parallel
port. You'd also need to aquire one of the X1541 flavor of cables. It's all
documented on the Star Commander homepage.

Hope this helps.

Cheers
Paul
Re: Advice on the best drive emulator? [message #414421 is a reply to message #414416] Sun, 08 May 2022 07:41 Go to previous messageGo to next message
Robert Roland is currently offline  Robert Roland
Messages: 85
Registered: July 2012
Karma: 0
Member
On Sat, 7 May 2022 20:57:00 -0700 (PDT), Kenzo <kjambrose@gmail.com>
wrote:

> The 1571 won't power up but using the same power supply the 1541 II works fine.

Wait. What?

The 1571 has a built-in power supply. It is powered directly from the
mains wall socket.

You didn't plug the power supply into one of the IEC ports, did you?
--
RoRo
Re: Advice on the best drive emulator? [message #414422 is a reply to message #414417] Sun, 08 May 2022 07:44 Go to previous messageGo to next message
Robert Roland is currently offline  Robert Roland
Messages: 85
Registered: July 2012
Karma: 0
Member
On 8 May 2022 05:28:09 GMT, Paul Förster <paul.foerster@gmail.com>
wrote:

> I suggest
> taking the VIC chip out and clean the contacts, then put it back in. This can
> be easily done if the chip sits in a socket. If it's soldered in then you may
> have some soldering to do.

From what I understand, the VIC2 is always in a socket. It is,
however, likely to be one of those cheap single-wipe types which are
notorious for having bad connections.
--
RoRo
Re: Advice on the best drive emulator? [message #414423 is a reply to message #414422] Sun, 08 May 2022 09:35 Go to previous messageGo to next message
KJAmbrose@gmail.com is currently offline  KJAmbrose@gmail.com
Messages: 63
Registered: March 2005
Karma: 0
Member
On Sunday, May 8, 2022 at 4:44:24 AM UTC-7, Robert Roland wrote:
> On 8 May 2022 05:28:09 GMT, Paul Förster <paul.f...@gmail.com>
> wrote:
>> I suggest
>> taking the VIC chip out and clean the contacts, then put it back in. This can
>> be easily done if the chip sits in a socket. If it's soldered in then you may
>> have some soldering to do.
> From what I understand, the VIC2 is always in a socket. It is,
> however, likely to be one of those cheap single-wipe types which are
> notorious for having bad connections.
> --
> RoRo
right, i misspoke about 1571, it is the first version and uses just iec power cord. but it won't power up. I have book on trouble shooting and repairing C64, but since I now have three working 128s, fixing the C64 work will be on back burner, as will troubleshooting the 1571. First order of business I guess will be to convert all the physical floppies to d64, and get the ram expansion running with GEOS.
Re: Advice on the best drive emulator? [message #414424 is a reply to message #414417] Sun, 08 May 2022 13:28 Go to previous messageGo to next message
KJAmbrose@gmail.com is currently offline  KJAmbrose@gmail.com
Messages: 63
Registered: March 2005
Karma: 0
Member
On Saturday, May 7, 2022 at 10:28:11 PM UTC-7, Paul Förster wrote:
> Hi Kenzo,
> On 08. May, 2022 at 05:57:00 CEST, "Kenzo" <kjam...@gmail.com> wrote:
>> The 1571 won't power up but using the same power supply the 1541 II works
>> fine. And the second 1541 also works fine. So I have two drives working, but
>> not the 1571 yet.
> I'm not sure that you can use a 1541-II power supply with a 1571. I'd do some
> research before trying that because a bad power supply can not only not power
> up the attached device correctly but it can kill it. So I'd be careful when
> trying a Commodore power supply with a different device than what it was built
> for. You should basically always assume that Commodore power supplies are NOT
> interchangeable between devices.
>> And I had 4 computers in storage, a 64 and three original type128s. The 64
>> powers up, but composite connected monitor is blank. I have to do some
>> research for that. Maybe the 64 does not output composite video?
> The C64 has a composite signal. It's pin 4 of the connector.
>
> See: http://www.hardwarebook.info/C128/C64C_Video
>
> But your VIC chip may be fried (or the monitor of course). Or it may suffer
> from a bad connection. It's hard to say without detailed info. I suggest
> taking the VIC chip out and clean the contacts, then put it back in. This can
> be easily done if the chip sits in a socket. If it's soldered in then you may
> have some soldering to do. But instead of soldering it back in I would put in
> a socket.
>> The three 128s all work fine. Next I will try the two 1764 ram expansion
>> modules. The one I have that was boxed comes with a commodore higher powered
>> power supply. I will check the output voltages before powering up with it.
> I can't comment on the 1764. I never had one of those.
>> So now that I can read disks, I guess the next step is to clean and lube the
>> drives, and then figure out a way to convert the physical floppies to .d64
>> files, since I don't expect the drives to work forever.
> Most things are on the web already in d64 format. You'd have to search hard
> for some things, though. But if you want to do the conversion yourself, then
> there are several options, of which I can recomment two:
>
> 1) if you want to do it on the C64/C128, then use method 4 of:
>
> https://diginoodles.com/writing/media-production/transferrin g-commodore-64-disks-to-modern-formats
>
> 2) get a Star Commander cable and connect the drive to a PC running DOS. Then
> you can use the Star Commander:
> https://sta.c64.org/sc.html
>
> Though the second option is very comfortable and reminiscent of the well known
> Norton Commander, it requires an old PC running DOS and having a parallel
> port. You'd also need to aquire one of the X1541 flavor of cables. It's all
> documented on the Star Commander homepage.
>
> Hope this helps.
>
> Cheers
> Paul
Zoomfloppy? Looks great for converting physical floppies to D64 copies in windows and reverse?
Re: Advice on the best drive emulator? [message #414425 is a reply to message #414395] Sun, 08 May 2022 14:38 Go to previous messageGo to next message
Anonymous
Karma:
Originally posted by: xxxx

> Can anyone recommend the preferred drive emulator for making use of .d64 files?
> I want to run the .d64 files on my 128 after I have downloaded onto my windows PC.
> I see various hardware on the Bay but not sure which will work on a 128 in either mode.

You should try Pi1541 is much compatible than SDIEC
Re: Advice on the best drive emulator? [message #414426 is a reply to message #414424] Sun, 08 May 2022 16:13 Go to previous messageGo to next message
Robert Roland is currently offline  Robert Roland
Messages: 85
Registered: July 2012
Karma: 0
Member
On Sun, 8 May 2022 10:28:34 -0700 (PDT), Kenzo <kjambrose@gmail.com>
wrote:

> Zoomfloppy? Looks great for converting physical floppies to D64 copies in windows and reverse?

I have a Zoomfloppy. I definitely recommend it.

The accompanying software (OpenCBM) does not provide a GUI, but there
are 3rd party solutions available for free. I use cbm-transfer.
--
RoRo
Re: Advice on the best drive emulator? [message #414427 is a reply to message #414423] Sun, 08 May 2022 17:03 Go to previous messageGo to next message
Robert Roland is currently offline  Robert Roland
Messages: 85
Registered: July 2012
Karma: 0
Member
On Sun, 8 May 2022 06:35:53 -0700 (PDT), Kenzo <kjambrose@gmail.com>
wrote:

> it won't power up

It is likely that the power supply has failed.

The 1571 has a very simple linear power supply. It should be easy to
fix.

There is even a fuse, winch needs checking.

Also, the solder joints for the transformer can crack. The transformer
is heavy, and there is nothing other than the solder joints holding
it.

Be careful with mains voltage, though.
--
RoRo
Re: Advice on the best drive emulator? [message #414428 is a reply to message #414427] Sun, 08 May 2022 17:48 Go to previous messageGo to next message
KJAmbrose@gmail.com is currently offline  KJAmbrose@gmail.com
Messages: 63
Registered: March 2005
Karma: 0
Member
On Sunday, May 8, 2022 at 2:03:31 PM UTC-7, Robert Roland wrote:
> On Sun, 8 May 2022 06:35:53 -0700 (PDT), Kenzo <kjam...@gmail.com>
> wrote:
>
>> it won't power up
>
> It is likely that the power supply has failed.
>
> The 1571 has a very simple linear power supply. It should be easy to
> fix.
>
> There is even a fuse, winch needs checking.
>
> Also, the solder joints for the transformer can crack. The transformer
> is heavy, and there is nothing other than the solder joints holding
> it.
>
> Be careful with mains voltage, though.
> --
> RoRo
Thanks, I ordered a zoomfloppy today.
Regarding the 1571 I should just replace the linear power supply with an SMPS. If the fuse is blown there must have been a reason. There is a meanwell that is a good match. And there are 4 electrolytics on the logic board that should also be replaced. If I later find the heads are bad, I can use the SMPS for a different project...
Re: Advice on the best dr [message #414431 is a reply to message #414395] Sun, 08 May 2022 16:01 Go to previous messageGo to next message
Anonymous
Karma:
Originally posted by: nospam.Ron.L.

-=> xxxx wrote to All <=-

xx> You should try Pi1541 is much compatible than SDIEC

Ya, if you run something like a fast loader that reprogams the disk drive, an
SD2IEC won't work.

The problem with both the SD2IECs and Pi1541s are they usually amateur-made.
So quality and features will differ between them.

I started with a SD2IEC. But I wanted to hook up a printer and it didn't have
a passthrough.

So I got a Pi1541. That worked like a champ until I got my Commodore Plus/4.
It just wouldn't work on the Plus/4 for some reason - while it worked just fine
on the C64 and C128.

So I picked up a different Pi1541 and that works great on all my Commodore
systems (except for the PET).

The SD2IEC that I bought also is powered through the joystick port, so I can't
use that on the Plus/4 (it has different joystick ports).


.... Insert disk 5 of 4 and press any key to continue
___ MultiMail/Linux v0.52
Re: Advice on the best drive emulator? [message #414460 is a reply to message #414422] Thu, 12 May 2022 11:41 Go to previous messageGo to next message
Paul Förster is currently offline  Paul Förster
Messages: 415
Registered: April 2012
Karma: 0
Senior Member
Hi Robert,

On 08. May, 2022 at 13:44:25 CEST, "Robert Roland" <fake@ddress.no> wrote:
> From what I understand, the VIC2 is always in a socket. It is,
> however, likely to be one of those cheap single-wipe types which are
> notorious for having bad connections.

I don't know if it always sits in a socket. If so, the easier is it to take
care of it. Sometimes it also helps to check the soldering of either the
socket and/or the chip.

Cheers,
Paul
Re: Advice on the best drive emulator? [message #414466 is a reply to message #414428] Fri, 13 May 2022 07:52 Go to previous messageGo to next message
Anonymous
Karma:
Originally posted by: phigan

On 2022-05-08, Kenzo <kjambrose@gmail.com> wrote:
> Thanks, I ordered a zoomfloppy today.

I'm really liking this thread.

Just wanted to chime in that I too have a C64 that powers on with just a
black screen. I tried changing out the VIC and that made no difference.
Even tested the original as well as relacement VICs in a known good
system, and they both work fine. The first suggestion I got was to try
replacing the PLA, which I did, and also made no difference (also tested
that in the known good system). I don't _see_ any issues with any of the
caps on the board, but that doesn't necessarily mean there aren't any.

I'd be very interested to hear what's causing yours to do the same if
you should find out :).

Jelly of your C= collection! Never had a 128.
Re: Advice on the best drive emulator? [message #414467 is a reply to message #414466] Fri, 13 May 2022 10:06 Go to previous messageGo to next message
KJAmbrose@gmail.com is currently offline  KJAmbrose@gmail.com
Messages: 63
Registered: March 2005
Karma: 0
Member
On Friday, May 13, 2022 at 4:52:29 AM UTC-7, phigan wrote:
> On 2022-05-08, Kenzo <kjam...@gmail.com> wrote:
>> Thanks, I ordered a zoomfloppy today.
> I'm really liking this thread.
>
> Just wanted to chime in that I too have a C64 that powers on with just a
> black screen. I tried changing out the VIC and that made no difference.
> Even tested the original as well as relacement VICs in a known good
> system, and they both work fine. The first suggestion I got was to try
> replacing the PLA, which I did, and also made no difference (also tested
> that in the known good system). I don't _see_ any issues with any of the
> caps on the board, but that doesn't necessarily mean there aren't any.
>
> I'd be very interested to hear what's causing yours to do the same if
> you should find out :).
>
> Jelly of your C= collection! Never had a 128.
One book I have says a bad 6502 can also cause a black screen. I guess the moral of your story is you really have to troubleshoot electrically, just replacing arbitrary chips is not guaranteed to solve the problem. I have the documentation and equipment so I will be doing that soon and will update progress here.
Re: Advice on the best drive emulator? [message #414469 is a reply to message #414466] Fri, 13 May 2022 15:18 Go to previous messageGo to next message
Andreas Kohlbach is currently offline  Andreas Kohlbach
Messages: 1456
Registered: December 2011
Karma: 0
Senior Member
On Fri, 13 May 2022 11:52:25 -0000 (UTC), phigan wrote:
>
> On 2022-05-08, Kenzo <kjambrose@gmail.com> wrote:
>> Thanks, I ordered a zoomfloppy today.
>
> I'm really liking this thread.
>
> Just wanted to chime in that I too have a C64 that powers on with just a
> black screen. I tried changing out the VIC and that made no difference.
> Even tested the original as well as relacement VICs in a known good
> system, and they both work fine. The first suggestion I got was to try
> replacing the PLA, which I did, and also made no difference (also tested
> that in the known good system). I don't _see_ any issues with any of the
> caps on the board, but that doesn't necessarily mean there aren't any.
>
> I'd be very interested to hear what's causing yours to do the same if
> you should find out :).

If there are no other solution I recommend Adrian's Digital Basement on
Youtube. He appears to be a specialist when it comes to the C64 - and I
remember he had to deal with a lot of "black screeners" and always found
the culprit.

> Jelly of your C= collection! Never had a 128.

Neither did I. A friend had and I was envious. Probably because of the
shape of the shell, as we usually booted into C64 mode and did things a
C64 can do itself.
--
Andreas
Re: Advice on the best drive emulator? [message #414470 is a reply to message #414466] Fri, 13 May 2022 16:20 Go to previous messageGo to next message
Robert Roland is currently offline  Robert Roland
Messages: 85
Registered: July 2012
Karma: 0
Member
On Fri, 13 May 2022 11:52:25 -0000 (UTC), phigan
<phigan@bbs.penisys.cf> wrote:

> a C64 that powers on with just a
> black screen

The most useful tool for troubleshooting a black screen C64, is the
Dead Test Cartridge. Note that a black screen and a blank screen are
fundamentally different.

Throwing parts at it is a lottery. If you want to continue the
lottery, the RAM chips are a very common fault. The bad news is,
there's eight of them (or two if you have a later revision). Leave the
computer on for a minute or two and check for hot RAM chips. If they
get hot, they are definitely bad, but they can also be bad if they are
not getting hot. The Dead Test can sometimes tell you which specific
RAM chip is bad.

Another common problem is the power switch. It switches both the 5 V
DC and the 9 V AC. If the 5 V DC is not working, you will get a black
screen on the earlier revision (the longboards).

Have you checked voltages? That should come before even the Dead Test.
--
RoRo
Re: Advice on the best drive emulator? [message #419586 is a reply to message #414470] Sat, 11 March 2023 22:52 Go to previous message
Anonymous
Karma:
Originally posted by: phigan

On 2022-05-13, Robert Roland <fake@ddress.no> wrote:
>
> Have you checked voltages? That should come before even the Dead Test.

Will definitely be searching about this later when I'm not on the 8bit
typing on a BBS :), but do you know of a doc/page that has a list of
points with proper voltages that could be indicative of problems?
  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Comparable Software
Next Topic: Next SCCAN meeting - Saturday, March 18, 2023
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Fri Mar 29 10:07:34 EDT 2024

Total time taken to generate the page: 0.00407 seconds