Megalextoria: Vintage Macs Group » 63xx motherboard wanted

Home » Digital Archaeology » Computer Arcana » Apple » Vintage Macs Group » 63xx motherboard wanted

Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend

63xx motherboard wanted [message #397718]

Tue, 11 August 2020 17:02

tortoise
Messages: 15
Registered: June 2015

Karma: 0

Junior Member

I’m trying to upgrade my Quadra 630 with a ppc motherboard from the 6300 series line, 100 or 120 MHz only. I’m familiar with the criticisms of this line... the purpose besides the speed bump is to stand in for my ailing PowerBook 1400 (display is going, and my doctors are discouraging laptop use anyway). I’ve already tried EBay and received a couple damaged not working and discouraged but I’ve already set up for some support RAM etc. anybody have one?

--
--
-----
You received this message because you are a member of the Vintage Macs group.
The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to vintage-macs@googlegroups.com
To leave this group, send email to vintage-macs+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/vintage-macs

Support for older Macs: http://lowendmac.com/services/
---
You received this message because you are subscribed to the Google Groups "Vintage Macs" group.
To unsubscribe from this group and stop receiving emails from it, send an email to vintage-macs+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/vintage-macs/a99f5d25-d5c5 -4755-a1b0-4613b68eaaf2o%40googlegroups.com.

Report message to a moderator

63xx motherboard wanted [message #397763 is a reply to message #397718]

Wed, 12 August 2020 16:27

tortoise
Messages: 15
Registered: June 2015

Karma: 0

Junior Member

Someone asked me, “why not the 160 MHz board” and my response was

“ The 6360 / 160 is a bottom up redesign similar to 6400 or PowerBook 3400 with a PCI bus and most parts not same type. Although it fits the case and wiring harness they also recommend the power supply needs to be upgraded along with the motherboard

If you have 6360 motherboard and power supply and (at least 64MB) RAM and Cache, that’s what I would need to do the upgrade. [ also assuming PCI riser angle changer needed to install Ethernet or comm slot Ethernet card ]

Where as for the other earlier design I have compatible all those other parts and only need the motherboard “

--
--
-----
You received this message because you are a member of the Vintage Macs group.
The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to vintage-macs@googlegroups.com
To leave this group, send email to vintage-macs+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/vintage-macs

Support for older Macs: http://lowendmac.com/services/
---
You received this message because you are subscribed to the Google Groups "Vintage Macs" group.
To unsubscribe from this group and stop receiving emails from it, send an email to vintage-macs+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/vintage-macs/8ab0758a-7873 -4c48-8b13-44a65cd1ead8o%40googlegroups.com.

Report message to a moderator

Previous Topic:	FS: Apple ///, 10MB Profile, Drive ///, Monitor /// Package
Next Topic:	need to part with Macintosh hardware

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Apr 18 00:46:32 EDT 2024

Total time taken to generate the page: 0.13768 seconds