Megalextoria
Retro computing and gaming, sci-fi books, tv and movies and other geeky stuff.

Home » Digital Archaeology » Computer Arcana » Apple » PowerPC Macs » Troubleshooting a SCSI setup with an Atto PCIe card in a G5 quadcore
Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend 
Switch to threaded view of this topic Create a new topic Submit Reply
Troubleshooting a SCSI setup with an Atto PCIe card in a G5 quadcore [message #366569] Sat, 21 April 2018 16:40
Jörg Duurkoop is currently offline  Jörg Duurkoop
Messages: 47
Registered: November 2012
Karma: 0
Member
Hi,

Anybody here that has some experience with Atto PCIe SCSI-cards in a G5
quad running Tiger? I've just put an ATTO ExpressPCI UL5D in my quad
connected via an internal HD68 to 50pin and 50pin to external HD50
connector. The quad didn't start at first, apparently it tried to start up
from my old Microtek scanner

I can see the ATTO card in System profile now as two pci-bridges in slot 3
where the card is seated and two Atto Express PCI UL5D cards in slot 7x4
plus under Parallel SCSI I see two SCSI Parallel Domain devices, 0 and 1.

The ATTO Configuration Tool didn't install properly and whenever I had the
external HD50 connector engaged the quad wouldn't start, no matter if the
scanner was on or off.

So then I uninstalled the ATTO Config. Tool and everything works but no
cigar, no scanner is seen by VueScan. I bought the Atto card especially to
keep using my Microtek Scanmaker III.

What can I possibly try to get my setup working again? The scanner worked
perfectly with my G4 MDD connected to an Adaptec PCI card. RIP.

TIA for your replies, best regards,

Jörg

--
--
You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to g3-5-list@googlegroups.com
For more options, visit this group at http://groups.google.com/group/g3-5-list

---
You received this message because you are subscribed to the Google Groups "G-Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email to g3-5-list+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Re: Digest for g3-5-list@googlegroups.com - 3 updates in 1 topic
Next Topic: Have to replace my dying MDD
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Wed Jul 08 22:02:13 EDT 2020

Total time taken to generate the page: 0.00322 seconds