| Re: Digest for vintage-macs@googlegroups.com - 1 update in 1 topic [message #364208] |
Fri, 23 February 2018 17:46  |
vintage-macs
Messages: 425
Registered: April 2014
Karma: 0
|
Senior Member |
|
|
Do not forget to get the WATTAGE correct for those resistors!
--------------------------------------------
On Fri, 2/23/18, <vintage-macs@googlegroups.com> wrote:
Subject: Digest for vintage-macs@googlegroups.com - 1 update in 1 topic
To: "Digest recipients" <vintage-macs@googlegroups.com>
Received: Friday, February 23, 2018, 5:02 AM
vintage-macs@googlegroups.com
Google
Groups
Topic digest
View
all topics
Macintosh 12" RGB Display M1296G owners please
help -
1 Update
Macintosh 12" RGB Display M1296G owners please
help
zgbapl <zgba@o2.pl>: Feb 22 11:10AM -0800
Hi Guys,
the main board is pretty much complete now. I'm only
missing a few parts
now. I'd like to ask you to double check those two
resistors:
R423 - my initial guess (I don't remember if I measured
it or read the
stripes) was 6,8K, but you guys say it's 68K
R506 - the other way round - in my sheet it's 68K, not
6,8K
Additionally I'm not 100% sure if I got those power
resistors right:
R419, R526 - 1,2 ohm
R511, R514 - 10 ohm
R911 - 0,33 ohm
Hopefully I got it all right. Keep the fingers crossed.
Cheers,
Mateusz
W dniu wtorek, 20 lutego 2018 21:59:16 UTC+1 użytkownik The
One True
Stickman napisał:
Back to top
You received this digest because you're subscribed
to updates for this group. You can change your settings on
the group membership
page.
To unsubscribe from this group and stop receiving
emails from it send an email to vintage-macs+unsubscribe@googlegroups.com.
-----Inline Attachment Follows-----
--
--
-----
You received this message because you are a member of the Vintage Macs group.
The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to vintage-macs@googlegroups.com
To leave this group, send email to vintage-macs+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/vintage-macs
Support for older Macs: http://lowendmac.com/services/
---
You received this message because you are subscribed to the Google Groups "Vintage Macs" group.
To unsubscribe from this group and stop receiving emails from it, send an email to vintage-macs+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
|
|
|
|
| RE: Digest for vintage-macs@googlegroups.com - 1 update in 1 topic [message #364212 is a reply to message #364208] |
Sat, 24 February 2018 10:02  |
zgbapl
Messages: 14
Registered: January 2018
Karma: 0
|
Junior Member |
|
|
Hi Andrew,
sure thing. Most of the resistors were 0,125W and I've replaced them with 0,25W carbons or 0,6W metal films (1% ones). The bigger ones were mostly OK, the corrosion spared them because of their long leads, so I soldered them back in. Only 3 or 4 0,5 or 1W ones have been replaced with 1W resistors.
Cheers,
Mateusz
-----Original Message-----
From: 'andrew pugh' via Vintage Macs [mailto:vintage-macs@googlegroups.com]
Sent: Friday, February 23, 2018 11:47 PM
To: vintage-macs@googlegroups.com
Subject: Re: Digest for vintage-macs@googlegroups.com - 1 update in 1 topic
Do not forget to get the WATTAGE correct for those resistors!
--------------------------------------------
On Fri, 2/23/18, <vintage-macs@googlegroups.com> wrote:
Subject: Digest for vintage-macs@googlegroups.com - 1 update in 1 topic
To: "Digest recipients" <vintage-macs@googlegroups.com>
Received: Friday, February 23, 2018, 5:02 AM
vintage-macs@googlegroups.com
Google
Groups
Topic digest
View
all topics
Macintosh 12" RGB Display M1296G owners please help -
1 Update
Macintosh 12" RGB Display M1296G owners please help
zgbapl <zgba@o2.pl>: Feb 22 11:10AM -0800
Hi Guys,
the main board is pretty much complete now. I'm only missing a few parts
now. I'd like to ask you to double check those two
resistors:
R423 - my initial guess (I don't remember if I measured it or read the
stripes) was 6,8K, but you guys say it's 68K
R506 - the other way round - in my sheet it's 68K, not 6,8K
Additionally I'm not 100% sure if I got those power resistors right:
R419, R526 - 1,2 ohm
R511, R514 - 10 ohm
R911 - 0,33 ohm
Hopefully I got it all right. Keep the fingers crossed.
Cheers,
Mateusz
W dniu wtorek, 20 lutego 2018 21:59:16 UTC+1 użytkownik The One True
Stickman napisał:
Back to top
You received this digest because you're subscribed to updates for this group. You can change your settings on the group membership page.
To unsubscribe from this group and stop receiving emails from it send an email to vintage-macs+unsubscribe@googlegroups.com.
-----Inline Attachment Follows-----
--
--
-----
You received this message because you are a member of the Vintage Macs group.
The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to vintage-macs@googlegroups.com To leave this group, send email to vintage-macs+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/vintage-macs
Support for older Macs: http://lowendmac.com/services/
---
You received this message because you are subscribed to the Google Groups "Vintage Macs" group.
To unsubscribe from this group and stop receiving emails from it, send an email to vintage-macs+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
--
-----
You received this message because you are a member of the Vintage Macs group.
The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to vintage-macs@googlegroups.com
To leave this group, send email to vintage-macs+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/vintage-macs
Support for older Macs: http://lowendmac.com/services/
---
You received this message because you are subscribed to the Google Groups "Vintage Macs" group.
To unsubscribe from this group and stop receiving emails from it, send an email to vintage-macs+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
|
|
|
|
Members
Search
Help
Register
Login
Home
