Retro computing and gaming, sci-fi books, tv and movies and other geeky stuff.

Home » Archive » net.micro.cpm » NEED CPD DIAL CODE
Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend 
Switch to threaded view of this topic Create a new topic Submit Reply
NEED CPD DIAL CODE [message #70809] Thu, 23 May 2013 23:30
"MortonJim" is currently offline  "MortonJim"
Messages: 2
Registered: May 2013
Karma: 0
Junior Member
Message-ID: <345@sri-arpa.UUCP>
Date: Wed, 2-May-84 11:01:00 EDT
Article-I.D.: sri-arpa.345
Posted: Wed May  2 11:01:00 1984
Date-Received: Sat, 12-May-84 02:22:47 EDT
Lines: 11

 I have a Signalman Anchor modem, which used controlled pulse dialing. 
This means that there is an RS-232 Pin which if i set the modem is "off hook"
and if i reset the modem is "on hook". You dial a number by pulsing the 
line hi and low for the appropriate number of times for each digit of the 
phone number. 
    I need a 8080 or z80 code to dial this modem, preferably one that is 
compatible with mdm7whatever.  If there are no such codes, I will write one
but would like to avoid re-coding the wheel so to speak.
          Thanks in advance for any help,
                Jim Morton
  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: BYE3-22 modem remote console program available
Next Topic: Update of MDM7xx overlay list
Goto Forum:

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Mon May 16 05:41:36 EDT 2022

Total time taken to generate the page: 0.00519 seconds