Help please. 10Base-T transceiver POL indicator. [message #387029] |
Fri, 13 September 2019 21:05 |
|
Originally posted by: Leon Sargent
Good evening.
I bought a Connectware 10Base-t Transceiver it came with no manual. Googling seems to show no how to manual.
Connecting the device via AUI to the Ether Print Plus with no other networking cables.
Here is what I see.
The status lights on the Connectware 10Base-t Transceiver are
Power -- green
RX/Link -- off. -- no ethernet cable
TX -- green
COL. -- off
JAB -- off
POL -- Rapid blinking orange
SQE -- off
Attaching the Cat 6 ethernet cable from the Raspberry Pi, AppleShare Server, to the Connectware 10Base-t Transceiver here is what we see.
The status lights on the Connectware 10Base-t Transceiver are
Power -- green
RX/Link -- green -- slow blink
TX -- green
COL. -- off
JAB -- off
POL -- solid orange
SQE -- off
I understand what Power, RX/Link and TX mean. I am reading that POL is polarity yet I have not figured out how I am supposed to understand the light being on.
Could someone help me to understand a few things.
Am I looking to have the POL light on indicating everything is fine?
Does the POL light stay on because the CAT 6 cable I am using has a polarity issue?
Anyone?
Leon
|
|
|
Re: Help please. 10Base-T transceiver POL indicator. [message #387031 is a reply to message #387029] |
Sat, 14 September 2019 00:18 |
|
Originally posted by: Anthony Adverse
On Saturday, September 14, 2019 at 11:05:32 AM UTC+10, Leon Sargent wrote:
> Good evening.
>
> I bought a Connectware 10Base-t Transceiver it came with no manual. Googling seems to show no how to manual.
>
> Connecting the device via AUI to the Ether Print Plus with no other networking cables.
>
> Here is what I see.
>
> The status lights on the Connectware 10Base-t Transceiver are
>
> Power -- green
>
> RX/Link -- off. -- no ethernet cable
>
> TX -- green
>
> COL. -- off
>
> JAB -- off
>
> POL -- Rapid blinking orange
>
> SQE -- off
>
>
>
> Attaching the Cat 6 ethernet cable from the Raspberry Pi, AppleShare Server, to the Connectware 10Base-t Transceiver here is what we see.
>
> The status lights on the Connectware 10Base-t Transceiver are
>
> Power -- green
>
> RX/Link -- green -- slow blink
>
> TX -- green
>
> COL. -- off
>
> JAB -- off
>
> POL -- solid orange
>
> SQE -- off
>
> I understand what Power, RX/Link and TX mean. I am reading that POL is polarity yet I have not figured out how I am supposed to understand the light being on.
>
> Could someone help me to understand a few things.
>
> Am I looking to have the POL light on indicating everything is fine?
>
> Does the POL light stay on because the CAT 6 cable I am using has a polarity issue?
>
> Anyone?
>
> Leon
If you have 10Mb ethernet in there, and you're going from the adapter straight to the Pi, you may well need a crossover cable. I don't know about the Pi but the adapter won't be smart enough to rearrange itself.
A
|
|
|