| SCSI Cables [message #377891] |
Mon, 10 December 2018 11:40  |
Barry Cross
Messages: 53
Registered: June 2014
Karma: 0
|
Member |
|
|
Hi
I am looking for an SCSI cable for my Alps printer.
it is to plug the printer into my old Apple Macintosh Quadra 700,
They have a large SCSI plug at the printer end, I they they are 50 pin.
And a standard SCSI plug at the other end, for the Mac, I think they are 25 pin.
While I'm on the subject I would also like an SCSI Terminator plug,
again large size
50 pin. This is for the Alps 2nd SCSI socket, as I use the printer as
the last item in the SCSI chain.
I know this is a long shot but I hope there are some knocking about somewhere.
Regards
Barry
--
NHS Not For Sale:
https://sites.google.com/site/nhsnotforsale/
--
--
-----
You received this message because you are a member of the Vintage Macs group.
The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to vintage-macs@googlegroups.com
To leave this group, send email to vintage-macs+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/vintage-macs
Support for older Macs: http://lowendmac.com/services/
---
You received this message because you are subscribed to the Google Groups "Vintage Macs" group.
To unsubscribe from this group and stop receiving emails from it, send an email to vintage-macs+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
|
|
|
|
| Re: SCSI Cables [message #377892 is a reply to message #377891] |
Mon, 10 December 2018 11:44  |
Jonathan Morton
Messages: 188
Registered: January 2013
Karma: 0
|
Senior Member |
|
|
> On 10 Dec, 2018, at 6:40 pm, Barry Cross <ygwerin@gmail.com> wrote:
>
> They have a large SCSI plug at the printer end, I they they are 50 pin.
> And a standard SCSI plug at the other end, for the Mac, I think they are 25 pin.
That would be a standard 25-to-50-pin cable which is still being manufactured today:
https://www.amazon.com/Db25-Male-Cn50-25-conductors-Cable/dp /B00E3EGOK4
The other main SCSI port type has 68 pins and is used for "wide SCSI".
- Jonathan Morton
--
--
-----
You received this message because you are a member of the Vintage Macs group.
The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to vintage-macs@googlegroups.com
To leave this group, send email to vintage-macs+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/vintage-macs
Support for older Macs: http://lowendmac.com/services/
---
You received this message because you are subscribed to the Google Groups "Vintage Macs" group.
To unsubscribe from this group and stop receiving emails from it, send an email to vintage-macs+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
|
|
|
|
| Re: SCSI Cables [message #377893 is a reply to message #377891] |
Mon, 10 December 2018 11:48 |
Jonathan Morton
Messages: 188
Registered: January 2013
Karma: 0
|
Senior Member |
|
|
> On 10 Dec, 2018, at 6:40 pm, Barry Cross <ygwerin@gmail.com> wrote:
>
> While I'm on the subject I would also like an SCSI Terminator plug,
> again large size
> 50 pin. This is for the Alps 2nd SCSI socket, as I use the printer as
> the last item in the SCSI chain.
Similarly, these are still being made:
https://www.amazon.com/SCSI-Terminator-External-Passive-Cent ronics/dp/B00GYAH71A
- Jonathan Morton
--
--
-----
You received this message because you are a member of the Vintage Macs group.
The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to vintage-macs@googlegroups.com
To leave this group, send email to vintage-macs+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/vintage-macs
Support for older Macs: http://lowendmac.com/services/
---
You received this message because you are subscribed to the Google Groups "Vintage Macs" group.
To unsubscribe from this group and stop receiving emails from it, send an email to vintage-macs+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
|
|
|
|
|
|
| Re: SCSI Cables [message #377917 is a reply to message #377894] |
Mon, 10 December 2018 15:56 |
Charlie Eddy
Messages: 11
Registered: November 2017
Karma: 0
|
Junior Member |
|
|
can this be stopped?
(or, is it a joke?)
not sarcastically, though quizzically,
charlie
On Mon, Dec 10, 2018 at 9:07 AM James Kelly <jrkelly62@gmail.com> wrote:
> Welcome to Google!
>
> Hi
>
> thanks for join us!
>
> Reg Google
>
> --
> --
> -----
> You received this message because you are a member of the Vintage Macs
> group.
> The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our
> netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
> To post to this group, send email to vintage-macs@googlegroups.com
> To leave this group, send email to
> vintage-macs+unsubscribe@googlegroups.com
> For more options, visit this group at
> http://groups.google.com/group/vintage-macs
>
> Support for older Macs: http://lowendmac.com/services/
> ---
> You received this message because you are subscribed to the Google Groups
> "Vintage Macs" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to vintage-macs+unsubscribe@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>
--
--
-----
You received this message because you are a member of the Vintage Macs group.
The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to vintage-macs@googlegroups.com
To leave this group, send email to vintage-macs+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/vintage-macs
Support for older Macs: http://lowendmac.com/services/
---
You received this message because you are subscribed to the Google Groups "Vintage Macs" group.
To unsubscribe from this group and stop receiving emails from it, send an email to vintage-macs+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
|
|
|
|
|
|
| Re: SCSI Cables [message #377919 is a reply to message #377918] |
Mon, 10 December 2018 16:06 |
The One True Stickman
Messages: 85
Registered: April 2013
Karma: 0
|
Member |
|
|
I've been meaning to forward directly to a list nanny - I assume they can
unsubscribe the address - but have not yet spent the time to dig up a
direct email for any of them. Anyone have a nanny already in their rolodex?
On Mon, Dec 10, 2018 at 3:59 PM Jonathan Morton <chromatix99@gmail.com>
wrote:
> I emailed him directly and got the same auto-reply back. I recommend just
> force-unsubbing him.
>
> - Jonathan Morton
>
> --
> --
> -----
> You received this message because you are a member of the Vintage Macs
> group.
> The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our
> netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
> To post to this group, send email to vintage-macs@googlegroups.com
> To leave this group, send email to
> vintage-macs+unsubscribe@googlegroups.com
> For more options, visit this group at
> http://groups.google.com/group/vintage-macs
>
> Support for older Macs: http://lowendmac.com/services/
> ---
> You received this message because you are subscribed to the Google Groups
> "Vintage Macs" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to vintage-macs+unsubscribe@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>
--
--
-----
You received this message because you are a member of the Vintage Macs group.
The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to vintage-macs@googlegroups.com
To leave this group, send email to vintage-macs+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/vintage-macs
Support for older Macs: http://lowendmac.com/services/
---
You received this message because you are subscribed to the Google Groups "Vintage Macs" group.
To unsubscribe from this group and stop receiving emails from it, send an email to vintage-macs+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
|
|
|
|
| Re: SCSI Cables [message #377920 is a reply to message #377919] |
Mon, 10 December 2018 16:42 |
NODEraser
Messages: 94
Registered: June 2013
Karma: 0
|
Member |
|
|
I went to the Google Groups page and reported abuse/marked the message
as spam. Not sure if enough reports will remove him automatically, or
if human intervention is required.
On Mon, Dec 10, 2018 at 1:06 PM <theonetruestickman@gmail.com> wrote:
>
> I've been meaning to forward directly to a list nanny - I assume they can unsubscribe the address - but have not yet spent the time to dig up a direct email for any of them. Anyone have a nanny already in their rolodex?
>
> On Mon, Dec 10, 2018 at 3:59 PM Jonathan Morton <chromatix99@gmail.com> wrote:
>>
>> I emailed him directly and got the same auto-reply back. I recommend just force-unsubbing him.
>>
>> - Jonathan Morton
>>
>> --
>> --
>> -----
>> You received this message because you are a member of the Vintage Macs group.
>> The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
>> To post to this group, send email to vintage-macs@googlegroups.com
>> To leave this group, send email to vintage-macs+unsubscribe@googlegroups.com
>> For more options, visit this group at http://groups.google.com/group/vintage-macs
>>
>> Support for older Macs: http://lowendmac.com/services/
>> ---
>> You received this message because you are subscribed to the Google Groups "Vintage Macs" group.
>> To unsubscribe from this group and stop receiving emails from it, send an email to vintage-macs+unsubscribe@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
>
> --
> --
> -----
> You received this message because you are a member of the Vintage Macs group.
> The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
> To post to this group, send email to vintage-macs@googlegroups.com
> To leave this group, send email to vintage-macs+unsubscribe@googlegroups.com
> For more options, visit this group at http://groups.google.com/group/vintage-macs
>
> Support for older Macs: http://lowendmac.com/services/
> ---
> You received this message because you are subscribed to the Google Groups "Vintage Macs" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to vintage-macs+unsubscribe@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
--
[Greg Bennett]
-Independent Carpenter, Electrician & Lighting Designer
-Purveyor of Classic Apple & Macintosh Gear
http://www.hsiprodsvcs.com/
http://www.macshack.us/
--
--
-----
You received this message because you are a member of the Vintage Macs group.
The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to vintage-macs@googlegroups.com
To leave this group, send email to vintage-macs+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/vintage-macs
Support for older Macs: http://lowendmac.com/services/
---
You received this message because you are subscribed to the Google Groups "Vintage Macs" group.
To unsubscribe from this group and stop receiving emails from it, send an email to vintage-macs+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
|
|
|
|
| Re: SCSI Cables [message #377943 is a reply to message #377919] |
Mon, 10 December 2018 17:59 |
Charlie Eddy
Messages: 11
Registered: November 2017
Karma: 0
|
Junior Member |
|
|
Who oversees The Vintage Macs List?
Dan Knight of Low End Mac manages Vintage Macs, which was begun on June 18,
1998. Marten van de Kraats, Stuart Bell, Paul Stamsen, Scott Baret, Derek
Morton, and Willi Kusche are the group "nannies" (group managers).
On Mon, Dec 10, 2018 at 1:06 PM <theonetruestickman@gmail.com> wrote:
> I've been meaning to forward directly to a list nanny - I assume they can
> unsubscribe the address - but have not yet spent the time to dig up a
> direct email for any of them. Anyone have a nanny already in their rolodex?
>
> On Mon, Dec 10, 2018 at 3:59 PM Jonathan Morton <chromatix99@gmail.com>
> wrote:
>
>> I emailed him directly and got the same auto-reply back. I recommend
>> just force-unsubbing him.
>>
>> - Jonathan Morton
>>
>> --
>> --
>> -----
>> You received this message because you are a member of the Vintage Macs
>> group.
>> The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our
>> netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
>> To post to this group, send email to vintage-macs@googlegroups.com
>> To leave this group, send email to
>> vintage-macs+unsubscribe@googlegroups.com
>> For more options, visit this group at
>> http://groups.google.com/group/vintage-macs
>>
>> Support for older Macs: http://lowendmac.com/services/
>> ---
>> You received this message because you are subscribed to the Google Groups
>> "Vintage Macs" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to vintage-macs+unsubscribe@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
>>
> --
> --
> -----
> You received this message because you are a member of the Vintage Macs
> group.
> The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our
> netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
> To post to this group, send email to vintage-macs@googlegroups.com
> To leave this group, send email to
> vintage-macs+unsubscribe@googlegroups.com
> For more options, visit this group at
> http://groups.google.com/group/vintage-macs
>
> Support for older Macs: http://lowendmac.com/services/
> ---
> You received this message because you are subscribed to the Google Groups
> "Vintage Macs" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to vintage-macs+unsubscribe@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>
--
--
-----
You received this message because you are a member of the Vintage Macs group.
The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to vintage-macs@googlegroups.com
To leave this group, send email to vintage-macs+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/vintage-macs
Support for older Macs: http://lowendmac.com/services/
---
You received this message because you are subscribed to the Google Groups "Vintage Macs" group.
To unsubscribe from this group and stop receiving emails from it, send an email to vintage-macs+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
|
|
|
|
|
|
| Re: SCSI Cables [message #378075 is a reply to message #378068] |
Wed, 12 December 2018 00:05 |
Charlie Eddy
Messages: 11
Registered: November 2017
Karma: 0
|
Junior Member |
|
|
make it stop
On Tue, Dec 11, 2018 at 7:35 PM James Kelly <jrkelly62@gmail.com> wrote:
> Welcome to Google!
>
> Hi
>
> thanks for join us!
>
> Reg Google
>
> --
> --
> -----
> You received this message because you are a member of the Vintage Macs
> group.
> The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our
> netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
> To post to this group, send email to vintage-macs@googlegroups.com
> To leave this group, send email to
> vintage-macs+unsubscribe@googlegroups.com
> For more options, visit this group at
> http://groups.google.com/group/vintage-macs
>
> Support for older Macs: http://lowendmac.com/services/
> ---
> You received this message because you are subscribed to the Google Groups
> "Vintage Macs" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to vintage-macs+unsubscribe@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>
--
--
-----
You received this message because you are a member of the Vintage Macs group.
The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to vintage-macs@googlegroups.com
To leave this group, send email to vintage-macs+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/vintage-macs
Support for older Macs: http://lowendmac.com/services/
---
You received this message because you are subscribed to the Google Groups "Vintage Macs" group.
To unsubscribe from this group and stop receiving emails from it, send an email to vintage-macs+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
|
|
|
|
Members
Search
Help
Register
Login
Home
