|
Re: Can SheepShaver interface with an external usb floppy drive? [message #373274 is a reply to message #373273] |
Tue, 04 September 2018 05:52 |
Jonathan Morton
Messages: 188 Registered: January 2013
Karma: 0
|
Senior Member |
|
|
> On 4 Sep, 2018, at 12:45 pm, Jeff Roach <jeff.roach0@gmail.com> wrote:
>
> Wondering if images you copy into sheepshaver can be imaged to a floppy disk via an external usb floppy drive?
I'm not absolutely sure either way.
What I *am* sure about is that any such support will only work for high-density 1.4MB disks, not the older double-density 800KB disks used by the earliest Mac models. The latter require a variable-speed drive, which PC drives are not. As long as your Mac is new enough to have high-density disk support (including a SWIM controller), you'll be fine on that point.
- Jonathan Morton
--
--
-----
You received this message because you are a member of the Vintage Macs group.
The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to vintage-macs@googlegroups.com
To leave this group, send email to vintage-macs+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/vintage-macs
Support for older Macs: http://lowendmac.com/services/
---
You received this message because you are subscribed to the Google Groups "Vintage Macs" group.
To unsubscribe from this group and stop receiving emails from it, send an email to vintage-macs+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
|
|
|
|