Retro computing and gaming, sci-fi books, tv and movies and other geeky stuff.

Home » Archive » net.micro » Adaptec Winchester Controller
Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend 
Switch to threaded view of this topic Create a new topic Submit Reply
Adaptec Winchester Controller [message #268639] Wed, 13 November 1985 21:12
rsanderson is currently offline  rsanderson
Messages: 4
Registered: May 2013
Karma: 0
Junior Member
Article-I.D.: watale.2362
Posted: Wed Nov 13 21:12:10 1985
Date-Received: Thu, 14-Nov-85 00:57:21 EST
Distribution: na
Organization: U of Waterloo, Ontario
Lines: 19
Xref: watmath net.micro:12681 net.periphs:901

I have a controller (for a 10 Mb hard disk) made by Adaptec.
It has the number ACB4000 on it. I am looking for any information
about it -- schematics, IO registers, user manual, service manual,
etc. I got it second hand with nothing to go by. It has a 50-pin
flat cable which connects to an adaptor board in the computer --
could it be a SASI interface? Any help would be appreciated.
Thankyou in advance, and please mail replies to me.

               Roger Sanderson
               Electrical Engineering Dept.
               University of Waterloo
	       Waterloo Ontario Canada
               N2L 5E6
  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Wanted: Better Emulator
Next Topic: Expanding environment space in DOS 3.1
Goto Forum:

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Wed May 18 23:17:06 EDT 2022

Total time taken to generate the page: 0.02260 seconds